RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Engineering Materials & Industrial Hardware

Abrasives come in a range of formats, from basic sheets and pads through to brush, band and even liquids. Machine-based abrasives such as disks, wheels, and belts are available for both small and large scale applications and aid in high-quality finished products. Though all may come in their various forms, their function is almost always the same, to remove surface layers from a piece of material. This can be aggressive, removing large amounts of material in the initial forming of a project piece right down to finer material removal for final finishing and polishing.

Examples of abrasives:

  • Sandpaper
  • Machine sander pads, belts bands
  • Flap disks
  • Grinding disks wheels
  • Cup brushes

Other abrasives and finishing products?

Similar to regular abrasives, sharpening stones and blocks work to remove layers of material typically from tools such as chisels, drill bits and knives. Different finish grades, similar to abrasive grits, provide a guide to the amount of material to be removed and how fine a finish will remain. Higher grade stones and blocks will provide a finer finish providing a sharper tool.

Liquids and compounds are a fluid or block form abrasives that provide fine and professional surface finish to any piece. Featuring micro grains of mineral, liquids and compounds can be applied with pads, cloths and machines for high-quality finishing.

Finishing tools are used in manufacturing to clean up cut edges ready for sanding. Deburring tools are used to remove excess material left from cutting to prepare material for sanding and finishing.

What are engineering materials?

Used in manufacturing, research and development as well as hobby making and DIY, engineering materials are raw form materials in a range of shapes and sizes. Available in metals, rubber, ceramic, carbon fibre and plastics, these raw form materials can be used to create almost anything.

Available in a range of shapes and profiles, tubes, rods and angles are available in different sizes and profiles, these variables can be length, diameter and thickness as well and inside and outside diameters when using tubular materials.

Profile Examples

  • Flat round bar
  • L angle
  • Square, hex round tube

Sheet materials are available as standard or perforated in a range of sizes. These can utilise different perforation shapes such as circles, hexagons, triangles and more as well as different sizing and spacing.

Related Products
Related Products
3M 566A Zirconia Aluminium Flap Disc, 115mm, Medium
3M 566A Zirconia Aluminium Flap Disc, 115mm, Medium

Introducing the 3M™ 566A, this flap disc provides ...

Introducing the 3M™ 566A, this flap disc provides ...

DeWALT Ceramic Flap Disc, 125mm
DeWALT Ceramic Flap Disc, 125mm

DeWalt Xtreme runtime flap discs. These accessories are ...

DeWalt Xtreme runtime flap discs. These accessories are ...

RS PRO Zirconium Dioxide Flap Disc, 125mm, P40
RS PRO Zirconium Dioxide Flap Disc, 125mm, P40

The RS PRO flap disc has abrasive material ...

The RS PRO flap disc has abrasive material ...

Bosch X-Lock Zirconia Aluminium Flap Disc, 125mm, P120
Bosch X-Lock Zirconia Aluminium Flap Disc, 125mm, P120

The X-LOCK X571 Best for Metal Flap Disc ...

The X-LOCK X571 Best for Metal Flap Disc ...

Related Items
Related Items
Popular Searches
Popular Searches