TE Connectivity DuraSeal Butt Wire Splice Connector, Red, Insulated, Tin Plated 22 → 18 AWG

Bulk discount available

Subtotal (1 pack of 50 units)*

PHP1,628.75

(exc. VAT)

PHP1,824.20

(inc. VAT)

Add to Basket
Select or type quantity
Temporarily out of stock
  • 15,400 unit(s) shipping from August 06, 2026
  • Plus 33,100 unit(s) shipping from October 01, 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per Unit
Per Pack*
50 - 200PHP32.575PHP1,628.75
250 - 1200PHP31.761PHP1,588.05
1250 - 2450PHP30.967PHP1,548.35
2500 - 12450PHP30.193PHP1,509.65
12500 +PHP29.438PHP1,471.90

*price indicative

RS Stock No.:
533-673
Mfr. Part No.:
DS-18-22-RS
Manufacturer:
TE Connectivity
Find similar products by selecting one or more attributes.
Select all

Brand

TE Connectivity

Splice Type

Butt

Wire Size

22 → 18 AWG

Overall Length

36mm

Diameter

3.7mm

Insulation

Insulated

Colour

Red

Series

DuraSeal

Contact Material

Copper

Contact Plating

Tin

COO (Country of Origin):
MX

Red 22 → 18 AWG


Features and Benefits:


Colour is red - colour coded for easy identification of gauge sizes

Maximum wire size 1.5mm Dia.

0.5 to 1.0mm² CSA

Resistance to moisture and abrasion

Strain relief

Protection from wire pull out

Easy to install

Materials:

Insulative sleeve - polyamide with thermoplastic adhesive coating inside

Crimp splice – Tin plated copper alloy

Base metal – Copper

Applications:


These splice connectors are designed to splice tin plated or bare copper stranded wires with an insulation rated for at least 85 degrees C. Can be found in areas such as:

Automotive

Commercial wiring

Marine electronics

Splices


Red 0.25 - 1.6 mm²

Blue 1.0 - 2.6 mm²

Yellow 2.7 - 6.6 mm²

Duraseal Heatshrinkable


TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important

• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Related links