Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 1 - 20 of 606 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 534-288
BrandRS PRO
PHP5.894
Each (In a Pack of 100)
units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 24.5mm 4mm 22AWG Insulated 16AWG - Red - PVC -
RS Stock No. 534-648
BrandRS PRO
PHP6.641
Each (In a Pack of 100)
units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.5mm 4.8mm 16AWG Insulated 14AWG - Blue - PVC -
RS Stock No. 239-3988
BrandRS PRO
PHP884.37
1 Box of 100
Box(es)
Butt - 26 → 19 AWG - - 2.08mm - Insulated - - Yellow - PP -
RS Stock No. 534-519
BrandRS PRO
PHP8.903
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 24.5mm 5.8mm 12AWG Insulated 10AWG - Yellow - PVC -
RS Stock No. 267-3997
BrandRS PRO
PHP9.107
Each (In a Pack of 100)
units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 31mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 531-352
BrandRS PRO
PHP2.968
Each (In a Pack of 25)
units
Tap 0.75mm² 18 → 14 AWG 2.5mm² 27mm 20mm 18AWG Insulated 14AWG - Blue - PP -
RS Stock No. 119-198
BrandRS PRO
PHP19.89
Each (In a Pack of 25)
units
Butt - 10 mm² 10mm² 23mm 4.5mm - Uninsulated - - - - - -
RS Stock No. 613-9766
BrandRS PRO
PHP12.422
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 26mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS Stock No. 267-4007
BrandRS PRO
PHP30.355
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 41mm 6.2mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 510-4826
BrandRS PRO
PHP195.33
1 Bag of 50
Bag(s)
Tap 4mm² 12 → 10 AWG 6mm² 34.5mm 20.5mm 12AWG Insulated 10AWG - Yellow - PP -
RS Stock No. 510-4854
BrandRS PRO
PHP212.70
1 Bag of 50
Bag(s)
T-Tap - 12 AWG 4mm² 37mm 9.8mm - Insulated 12AWG - Yellow - Nylon -
RS Stock No. 239-4234
BrandRS PRO
PHP6.178
Each (In a Pack of 100)
units
Butt 0.2mm² 26 → 22 AWG 0.5mm² 20mm 2mm 26AWG Insulated 22AWG - Yellow - Nylon -
RS Stock No. 613-9794
BrandRS PRO
PHP8.59
Each (In a Pack of 100)
units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 24.2mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 534-913
BrandRS PRO
PHP10.394
Each (In a Pack of 100)
units
Closed End 2.5mm² 2.5 → 6 mm² 6mm² 24.1mm 10.5mm 10 AWG, 12 AWG Insulated - - Clear - Nylon -
RS Stock No. 119-227
BrandRS PRO
PHP36.575
Each (In a Pack of 10)
units
Butt - 35 mm² 35mm² 35mm 8.6mm - Uninsulated - - - - - -
RS Stock No. 510-4810
BrandRS PRO
PHP128.40
1 Bag of 50
Bag(s)
Tap 0.5mm² 20 → 18 AWG 0.75mm² 27mm 20mm 22AWG Insulated 18AWG - Red - PP -
RS Stock No. 613-9738
BrandRS PRO
PHP7.906
Each (In a Pack of 100)
units
Parallel 1.5mm² 16 → 14 AWG 2.5mm² 16.5mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 205-0710
BrandRS PRO
PHP8.786
Each (In a Pack of 100)
units
Closed End 1.5mm² 1 → 2.6 mm² 2.5mm² 21mm 7.4mm 16AWG Insulated 14AWG - Clear - Nylon -
RS Stock No. 119-211
BrandRS PRO
PHP22.468
Each (In a Pack of 10)
units
Butt - 25 mm² 25mm² 31mm 6.7mm - Uninsulated - - - - - -
RS Stock No. 510-4775
BrandRS PRO
PHP1,051.06
1 Bag of 100
Bag(s)
Butt - 26 → 22 AWG - 12.5mm 7.9mm 26AWG Insulated 22AWG 2 White, Yellow - - -
Related Products
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when ...
Clear shell push-wire connectors accommodate any combination of ...
Description:
Clear shell push-wire connectors accommodate any combination of 0.8 - 3.0mm² solid copper, or 'tinned end' multistrand copper conductors. Fast and easy no-twist push-in connectorsVisual confirmation of every connection and strip length shown on mouldingWire removal simply effectedRated to 105°CProbe ...
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals ...
Description:
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...