SKF 62/28-2RS1/C3 Single Row Deep Groove Ball Bearing- Both Sides Sealed 28mm I.D, 58mm O.D

SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.

Features:

• Excellent performance in hot conditions, dry environments and low rotational speed applications
• Temperature range -30°C to 150°C
• Suitable for high and very high speeds
• Steel/Ceramic ball material
• Plain race type
• Low friction
• Available in many designs, variants and sizes

Why choose Deep Groove Ball Bearings?

• For their versatility - channelling radial and axial loads they are widely used in many industries
• Cost efficient - due to low friction torque the temperature remains low therefore reduces the energy cost of running in equipment such as the conveyor belt
• Low maintenance - no additional lubrication after installation

Applications:

• Agricultural industry
• Food processing
• Machine Tools
• Material handling
• Medical/Pharmaceutical
• Printing
• Wind energy

What is the inner ring diameter?
A range between 6 mm to 40 mm

What is internal/external design?

• 2RS1 - Contact seal NBR on both sides 2RSH - Contact seal NBR on both sides
• Z, 2Z - Shield on one or both sides
• 2RSL - RSL low-friction contact seal on both sides of the bearing
• 2RZ - RZ low-friction non-contact seal on both sides of the bearing
• 2ZNR - Shield on both sides, snap ring groove in the outer ring, with snap ring
• NR - Snap ring groove in the outer ring, with an appropriate snap ring
• E - Reinforced ball set

Cage Design

• TN9 - Glass fibre reinforced polyamide 66 cages, rolling element centred
• Stainless steel

Lubrication

• GJN - Grease with a polyurea thickener of consistency 2 to the NLGI scale for a temperature range -30°C to +150°C (normal fill grade) VT162 - Lubricated with Klueber Isoflex Topas NB52 grease
• WT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +160 °C
• LHT - Grease with a lithium thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –50°C to +140 °C
• HT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +150 °C (normal fill grade)

Accuracy/Clearance

• C2 - Radial internal clearance smaller than normal C3 - Internal clearance greater than normal
• C4 - Radial internal clearance greater than C3
• C5 - Radial internal clearance greater than C4

Use this versatile deep-groove ball bearing from SKF to handle both radial and axial loads. It's made from hard-wearing steel that resists corrosion and wear, making it suitable to use in demanding industrial applications and humid conditions. Seals on both sides of the bearing help it to retain its grease, so there's no need for regular relubrication. A strong steel cage assists in keeping the rolling elements held precisely in place for optimal rotational speed. This unit produces minimal friction, which keeps the operating temperature of your equipment down and increases the lifespan of the bearing.

• Compatible with demanding environments, thanks to a broad operating temperature range between -40°C and +100°C
• Nitrile rubber seals withstand chemicals and abrasion for longevity
• Accommodates short periods of shaft misalignment for ease of use
• Low environmental impact as it's greased for life to reduce lubrication wastage

• Production lines
• Hoisting and lifting
• Elevators
• Robotics systems

Yes, for your convenience this ball bearing is pre-lubricated with a grease that has rust-inhibiting properties, so there's minimal chance of it corroding.

Deep Groove Ball Bearings