SMC Pneumatic Guided Cylinder - 50mm Bore, MGP Series, 150 mm Double Acting Acting

RS Stock No.:: 758-0840
Mfr. Part No.:: MGPM50TF-150Z
Manufacturer:: SMC

SMC Pneumatic Guided Cylinder - 50mm Bore, MGP Series, 150 mm Double Acting Acting

This image is representative of the product range

View all Pneumatic Guided Cylinders

Subtotal (1 unit)*

PHP52,772.92

(exc. VAT)

PHP59,105.67

(inc. VAT)

FREE delivery for orders over ₱5,000.00

In Stock

1 unit(s) ready to ship from another location

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per Unit
1 +	PHP52,772.92

*price indicative

RS Stock No.:: 758-0840
Mfr. Part No.:: MGPM50TF-150Z
Manufacturer:: SMC

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SMC
	Product Type	Pneumatic Guided Cylinder
	Bore Diameter	50mm
	Series	MGP
	Action Type	Double Acting
	Mount Type	Bottom, Side, Top Mount
	Maximum Operating Pressure	1 Mpa
	Cushioning Type	Rubber
	Piston Rod Thread Standard	G
	Guide Type	Slide Bearing
	Rod Type	Single
	Minimum Operating Temperature	-10°C
	Maximum Piston Speed	500mm/s
	Maximum Operating Temperature	60°C
	Height	112mm
	Width	48mm
	Standards/Approvals	No
	Weight	6.7kg
	Stroke Length	150mm
	Length	268mm

	Select all
	Brand SMC
	Product Type Pneumatic Guided Cylinder
	Bore Diameter 50mm
	Series MGP
	Action Type Double Acting
	Mount Type Bottom, Side, Top Mount
	Maximum Operating Pressure 1 Mpa
	Cushioning Type Rubber
	Piston Rod Thread Standard G
	Guide Type Slide Bearing
	Rod Type Single
	Minimum Operating Temperature -10°C
	Maximum Piston Speed 500mm/s
	Maximum Operating Temperature 60°C
	Height 112mm
	Width 48mm
	Standards/Approvals No
	Weight 6.7kg
	Stroke Length 150mm
	Length 268mm

SMC MGP Series Compact Guide Cylinder, 50mm Bore size, 150mm Stroke Length - MGPM50TF-150Z

This Compact guide cylinder provides guided linear motion for industrial automation tasks, combining a guided slide mechanism with pneumatic actuation to control lateral loads while moving a payload. It is designed for integration where space is limited and precise guided travel is required, operating within standard industrial temperature ranges and compatible with multiple mounting orientations.

Features and Benefits:

• 1MPa maximum operating pressure enables robust pneumatic control
• 150mm stroke offers substantial travel for confined installations
• 50mm bore delivers high positional repeatability and force capacity
• Rubber bumpers on both ends reduce impact and prolong service life
• Slide bearing guide gives stable lateral load support during motion
• Maximum piston speed 500mm/s permits Rapid cycle capability

Applications

• Suitable for pick-and-place modules in automation lines
• Ideal for positioning assemblies in electronics manufacture
• Used with test rigs requiring guided linear motion under load
• Can be used for component transfer in mechanical assembly cells
• Suitable for panel handling and small press alignment tasks

What mounting options are available for flexible installation?

It supports bottom, side and TOP mounting, enabling installation in varied orientations to suit machine layouts.

How does ambient temperature affect operation?

It operates between -10°C and 60°C, so performance remains within that thermal range without additional cooling or heating.

What is the unit mass for handling and support calculations?

The unit weighs 6.055 kg, useful for fixture design and dynamic load assessments.

What rod and connection details should be considered for actuator interfaces?

The piston uses a single rod with a standard G‑threaded rod end for direct mechanical coupling to tooling.

Note

May be used with reed switch 161-782, available in most markets.