TL072BCP Texas Instruments, 3 MHz, 8-Pin 15V PDIP
- RS Stock No.:
- 709-2148P
- Mfr. Part No.:
- TL072BCP
- Manufacturer:
- Texas Instruments
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 709-2148P
- Mfr. Part No.:
- TL072BCP
- Manufacturer:
- Texas Instruments
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Texas Instruments | |
| Mount Type | Through Hole, Through Hole | |
| Package Type | PDIP | |
| Number of Channels | 2 | |
| Pin Count | 8 | |
| GBP - Gain Bandwidth Product | 3MHz | |
| Maximum Supply Voltage | 15V | |
| Minimum Supply Voltage | 5V | |
| Vos - Input Offset Voltage | 5 mV | |
| Input Bias Current | 7 nA | |
| Slew Rate | 13V/μs | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 4.57mm | |
| Standards/Approvals | No | |
| Width | 6.35mm | |
| Length | 9.81mm | |
| Series | TL072 | |
| Automotive Standard | No | |
| Input Offset Current | 2 nA | |
| Select all | ||
|---|---|---|
Brand Texas Instruments | ||
Mount Type Through Hole, Through Hole | ||
Package Type PDIP | ||
Number of Channels 2 | ||
Pin Count 8 | ||
GBP - Gain Bandwidth Product 3MHz | ||
Maximum Supply Voltage 15V | ||
Minimum Supply Voltage 5V | ||
Vos - Input Offset Voltage 5 mV | ||
Input Bias Current 7 nA | ||
Slew Rate 13V/μs | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 4.57mm | ||
Standards/Approvals No | ||
Width 6.35mm | ||
Length 9.81mm | ||
Series TL072 | ||
Automotive Standard No | ||
Input Offset Current 2 nA | ||
JFET Input Op Amp, TL070 & TL080 Families
A range of well-established high-performance JFET input, bipolar output OPerational amplifiers from Texas Instruments featuring low input bias currents and high slew rates. These OP amps have low noise and low distortion and are suitable for a wide variety of audio and signal processing applications. The high input impedance makes them an Ideal choice where circuit loading must be minimized. Offset adjustment and external compensation OPtions are available with the single TL071 and TL081 devices.
• Low input bias and offset currents
• Wide supply voltage range: ±5 to ±15V
• Low noise: 18nV/√Hz typical at 1 kHz
• High Slew Rate: 13 V/μs typical
• Low Total Harmonic Distortion: 0.003% typical
• Single, Dual and Quad devices available
Related links
- Unistrut 41 x 41mm Slotted Galvanised Steel Strut, 2m Long
- RS PRO Stainless Steel Perforated Metal Sheet 500mm x 500mm, 0.55mm Thick
- Belden Cat6 Ethernet Cable Grey PVC Sheath, 100m
- Stanley Tylon 8m Tape Measure, Metric & Imperial
- Arduino Uno Rev 3 SMD
- RS PRO Combination Pliers Straight Tip, 34mm Jaw
- RS PRO 150 mm Stainless Steel Scissors
- RS PRO Phillips Screwdriver 150 mm Blade, 270 mm Overall