TL072BCP Texas Instruments, 3 MHz, 8-Pin 15V PDIP
- RS Stock No.:
- 709-2148
- Mfr. Part No.:
- TL072BCP
- Manufacturer:
- Texas Instruments
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 709-2148
- Mfr. Part No.:
- TL072BCP
- Manufacturer:
- Texas Instruments
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Texas Instruments | |
| Mount Type | Through Hole, Through Hole | |
| Package Type | PDIP | |
| Number of Channels | 2 | |
| Pin Count | 8 | |
| GBP - Gain Bandwidth Product | 3MHz | |
| Minimum Supply Voltage | 5V | |
| Maximum Supply Voltage | 15V | |
| Slew Rate | 13V/μs | |
| Vos - Input Offset Voltage | 5 mV | |
| Minimum Operating Temperature | 0°C | |
| Input Bias Current | 7 nA | |
| Maximum Operating Temperature | 70°C | |
| Length | 9.81mm | |
| Series | TL072 | |
| Width | 6.35mm | |
| Standards/Approvals | No | |
| Height | 4.57mm | |
| Automotive Standard | No | |
| Input Offset Current | 2 nA | |
| Select all | ||
|---|---|---|
Brand Texas Instruments | ||
Mount Type Through Hole, Through Hole | ||
Package Type PDIP | ||
Number of Channels 2 | ||
Pin Count 8 | ||
GBP - Gain Bandwidth Product 3MHz | ||
Minimum Supply Voltage 5V | ||
Maximum Supply Voltage 15V | ||
Slew Rate 13V/μs | ||
Vos - Input Offset Voltage 5 mV | ||
Minimum Operating Temperature 0°C | ||
Input Bias Current 7 nA | ||
Maximum Operating Temperature 70°C | ||
Length 9.81mm | ||
Series TL072 | ||
Width 6.35mm | ||
Standards/Approvals No | ||
Height 4.57mm | ||
Automotive Standard No | ||
Input Offset Current 2 nA | ||
JFET Input Op Amp, TL070 & TL080 Families
A range of well-established high-performance JFET input, bipolar output OPerational amplifiers from Texas Instruments featuring low input bias currents and high slew rates. These OP amps have low noise and low distortion and are suitable for a wide variety of audio and signal processing applications. The high input impedance makes them an Ideal choice where circuit loading must be minimized. Offset adjustment and external compensation OPtions are available with the single TL071 and TL081 devices.
• Low input bias and offset currents
• Wide supply voltage range: ±5 to ±15V
• Low noise: 18nV/√Hz typical at 1 kHz
• High Slew Rate: 13 V/μs typical
• Low Total Harmonic Distortion: 0.003% typical
• Single, Dual and Quad devices available