Texas Instruments, Operational Amplifier, 140 MHz, 20-Pin 16V HSOIC
- RS Stock No.:
- 268-3582
- Mfr. Part No.:
- THS6012IDWP
- Manufacturer:
- Texas Instruments
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 268-3582
- Mfr. Part No.:
- THS6012IDWP
- Manufacturer:
- Texas Instruments
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Texas Instruments | |
| Product Type | Operational Amplifier | |
| Mount Type | Surface | |
| Package Type | HSOIC | |
| Number of Channels | 1 | |
| Pin Count | 20 | |
| GBP - Gain Bandwidth Product | 140MHz | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 16V | |
| Slew Rate | 1300V/μs | |
| Vos - Input Offset Voltage | 7 mV | |
| Minimum Operating Temperature | -40°C | |
| Input Bias Current | 10 fA | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Series | THS6 | |
| Output Current | 400mA | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Texas Instruments | ||
Product Type Operational Amplifier | ||
Mount Type Surface | ||
Package Type HSOIC | ||
Number of Channels 1 | ||
Pin Count 20 | ||
GBP - Gain Bandwidth Product 140MHz | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 16V | ||
Slew Rate 1300V/μs | ||
Vos - Input Offset Voltage 7 mV | ||
Minimum Operating Temperature -40°C | ||
Input Bias Current 10 fA | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Series THS6 | ||
Output Current 400mA | ||
Automotive Standard No | ||
The Texas Instruments Op Amps contains two high speed drivers capable of providing 400 mA output current into a 25 ohm load. These drivers can be configured differentially to drive a 50 VPP output signal over low impedance lines. The drivers are current feedback amplifiers designed for the high slew rates necessary to support low total harmonic distortion in xDSL applications. The op amps ideally suited for asymmetrical digital subscriber line applications at the central office where it supports the high peak voltage and current requirements of this application.
ADSL differential line driver
Independent power supplies for low crosstalk
Improved replacement for AD815
Evaluation module available
High speed
Related links
- THS6012IDWP Texas Instruments 140 MHz, 20-Pin 16V HSOIC
- Apex 140 MHz, 8-Pin 900V SIP
- PA94 Apex 140 MHz, 8-Pin 900V SIP
- Texas Instruments 10 MHz, 8-Pin 16V SOIC
- Texas Instruments 180 MHz, 8-Pin 16V SOIC
- Texas Instruments 3 MHz, 8-Pin 16V VSSOP
- Texas Instruments 1.7 MHz, 8-Pin 16V SOIC
- Texas Instruments 1.3 MHz, 8-Pin 16V PDIP