FAG 608-2RSR-HLN-C3 1 Row Deep Groove Ball Bearing - 8 mm ID, 22 mm OD
- RS Stock No.:
- 277-6631
- Mfr. Part No.:
- 608-2RSR-HLN-C3
- Manufacturer:
- FAG
Subtotal (1 pack of 10 units)*
PHP3,651.46
(exc. VAT)
PHP4,089.64
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per Unit | Per Pack* |
|---|---|---|
| 10 + | PHP365.146 | PHP3,651.46 |
*price indicative
- RS Stock No.:
- 277-6631
- Mfr. Part No.:
- 608-2RSR-HLN-C3
- Manufacturer:
- FAG
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FAG | |
| Inside Diameter | 8mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 22mm | |
| Race Width | 7mm | |
| Ball Material | Steel | |
| Cage Material | Steel Sheet Metal | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Static Load Rating | 1360N | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 3290N | |
| Standards/Approvals | No | |
| Series | 60 | |
| Bore Type | Cylindrical | |
| Limiting Speed | 34000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Flange Outside Diameter | 22mm | |
| Select all | ||
|---|---|---|
Brand FAG | ||
Inside Diameter 8mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 22mm | ||
Race Width 7mm | ||
Ball Material Steel | ||
Cage Material Steel Sheet Metal | ||
End Type Sealed | ||
Number of Rows 1 | ||
Static Load Rating 1360N | ||
Internal Clearance C3 | ||
Dynamic Load Rating 3290N | ||
Standards/Approvals No | ||
Series 60 | ||
Bore Type Cylindrical | ||
Limiting Speed 34000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Flange Outside Diameter 22mm | ||
RoHS Status: Exempt
Schaeffler Series 60 Deep Groove Ball Bearing, 8mm Bore Diameter, 22mm Outside Diameter - 608-2RSR-HLN-C3
This deep groove ball bearing is designed to support radial loads in rotating equipment within automation, electronics and mechanical assemblies. It operates reliably across a wide temperature span and incorporates sealed rings and a steel sheet‑metal cage to restrict contamination while enabling high‑speed rotation where Compact bearings are required.
Features & Benefits
• Dynamic load rating 3290 N provides sustained radial capacity
• Limiting speed 34 000 r/min enables high‑speed applications
• Sealed end design reduces ingress of debris and lubricant loss
• Steel cage 608 bearing offers robustness with low mass
• Limiting speed 34 000 r/min enables high‑speed applications
• Sealed end design reduces ingress of debris and lubricant loss
• Steel cage 608 bearing offers robustness with low mass
**Applications**
• Suitable for precision motor shafts in automation systems
• Ideal for miniature gearboxes in electrical actuators
• Used with PCB‑mounting motors in electronics assemblies
• Can be used for rotary encoders and small drives in robotics
• Ideal for miniature gearboxes in electrical actuators
• Used with PCB‑mounting motors in electronics assemblies
• Can be used for rotary encoders and small drives in robotics
What shaft and housing shoulder limits must I observe when mounting?
Minimum shaft shoulder diameter is 10mm and maximum housing shoulder diameter is 20mm to ensure correct axial seating.
What operating temperatures can it tolerate in continuous use?
The bearing functions between −30°C and 100°C for typical service conditions.
How does the bearing handle misalignment or heavy shock loads?
It is a single‑row design intended for primarily radial loads with a Basic static load rating of 1360 N
it is not optimised for large misalignment or repeated heavy shock.
What are the permissible fillet and chamfer dimensions for assembly?
Maximum fillet radius at mating shoulders is 0.3mm and minimum chamfer requirement is 0.3mm.