FAG 625-2RSR-HLN 1 Row Ball Bearing - 5 mm ID, 16 mm OD
- RS Stock No.:
- 260-0757
- Mfr. Part No.:
- 625-2RSR-HLN
- Manufacturer:
- FAG
Subtotal (1 pack of 10 units)*
PHP4,519.46
(exc. VAT)
PHP5,061.80
(inc. VAT)
FREE delivery for orders over ₱3,000.00
In Stock
- 40 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit | Per Pack* |
|---|---|---|
| 10 + | PHP451.946 | PHP4,519.46 |
*price indicative
- RS Stock No.:
- 260-0757
- Mfr. Part No.:
- 625-2RSR-HLN
- Manufacturer:
- FAG
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 5mm | |
| Outside Diameter | 16mm | |
| Race Width | 5mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 670N | |
| Dynamic Load Rating | 1.84kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Series | 62 | |
| Limiting Speed | 31500rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Select all | ||
|---|---|---|
Brand FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 5mm | ||
Outside Diameter 16mm | ||
Race Width 5mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 670N | ||
Dynamic Load Rating 1.84kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Series 62 | ||
Limiting Speed 31500rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
RoHS Status: Exempt
- COO (Country of Origin):
- CN
Schaeffler Series 62 Ball Bearing, 5mm Inside Diameter, 16mm Outside Diameter - 625-2RSR-HLN
This ball bearing is a sealed, single-row deep-groove unit designed to support radial loads in Compact rotating assemblies. It is intended for use in high-speed electromechanical and automation components where a sealed, low-mass bearing with steel cage construction is required. The bearing operates effectively across typical ambient temperature ranges and is suitable for miniature shaft applications.
Features & Benefits
• Sealed 2RSR design prevents contaminant ingress and reduces maintenance
• Steel cage reduces mass while maintaining structural stability
• High limiting speed 31,500 rpm enables fast-rotating applications
• Dynamic load capacity 1.84 kN supports transient radial forces
• CN internal clearance permits precise axial positioning
• Steel raceways provide consistent rolling performance under load
• Steel cage reduces mass while maintaining structural stability
• High limiting speed 31,500 rpm enables fast-rotating applications
• Dynamic load capacity 1.84 kN supports transient radial forces
• CN internal clearance permits precise axial positioning
• Steel raceways provide consistent rolling performance under load
**Applications**
• Suitable for high-speed motor spindles in automation equipment
• Ideal for miniature gearboxes in robotics and actuators
• Used with precision electronic cooling fans in servers and drives
• Can be used for rotary encoders in control systems
• Used for small pump shafts in fluid-handling devices
• Ideal for miniature gearboxes in robotics and actuators
• Used with precision electronic cooling fans in servers and drives
• Can be used for rotary encoders in control systems
• Used for small pump shafts in fluid-handling devices
What shaft shoulder dimensions should be considered for mounting?
Ensure the shaft shoulder diameter exceeds the minimum mounting requirement of 7.4mm to permit correct axial location.
What operating temperatures can be expected without lubricant change?
The bearing is rated for continuous operation between -30°C to 100°C, allowing use across common industrial climates.
How does the bearing cope with short-term heavy loads?
The Basic static radial rating of 670 N defines resistance to non-rotational overloads and supports brief load events without permanent deformation.
What assembly fillet allowance is needed at the ring edges?
The maximum allowable fillet on mating components is 0.3mm to avoid interference with the ring chamfer.
Related links
- FAG 625-2Z-C3-HLN 1 Row Ball Bearing - 5 mm ID, 16 mm OD
- FAG 625-2Z-HLN 1 Row Ball Bearing - 5 mm ID, 16 mm OD
- FAG 624-2RSR-HLN 1 Row Ball Bearing - 4 mm ID, 13 mm OD
- FAG 608-2RSR-HLN 1 Row Deep Groove Ball Bearing - 8 mm ID, 22 mm OD
- FAG 626-2RSR-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- FAG 628-2RSR-HLN 1 Row Deep Groove Ball Bearing - 8 mm ID, 24 mm OD
- FAG 608-2RSR-HLN-C3 1 Row Deep Groove Ball Bearing - 8 mm ID, 22 mm OD
- SKF W 625-2RS1 1 Row Ball Bearing - 5 mm ID, 16 mm OD