FAG 6207-C-2HRS>V 1 Row Ball Bearing - 35 mm ID, 72 mm OD

This ball bearing is a single-row deep-groove solution engineered for radial support in rotating assemblies within automation, electronics and mechanical systems. It incorporates sealed end protection and a steel cage to maintain internal cleanliness and enable dependable operation at moderate rotational speeds in industrial environments.

• Sealed ends reduce contamination ingress and lower maintenance needs
• Steel ball construction provides predictable rolling behaviour under load
• Steel containment cage maintains ball spacing for smoother rotation
• CN internal clearance ensures controlled axial play for alignment
• Dynamic capacity of 29.5 kN supports fluctuating radial loads
• Static capacity of 15.4 kN resists deformation under stoppage loads

• Suitable for electric motor bearing seats in automation equipment
• Ideal for precision spindle supports in electronics manufacture
• used with conveyor drive shafts in light industrial machinery
• Can be used for fan and blower shaft support in HVAC systems
• Suitable for gearbox intermediate shafts in small drives

It features a parallel bore intended for interference or close sliding fits in housings where axial positioning is controlled by external components.

End Seals retain grease within the bearing, reducing re-lubrication frequency compared with open bearings and helping preserve lubricant under typical operating conditions.

The bearing is rated for continuous operation up to 8,600 r/min under appropriate lubrication and alignment conditions.

The specified static load rating of 15.4 kN indicates the bearing’s resistance to permanent indentation when stationary or subjected to shock loads during stoppage.

The CN internal clearance offers a NEUTRAL amount of radial internal clearance to accommodate normal thermal expansion and assembly tolerances.