FAG 16008-A-C3 1 Row Ball Bearing - 40 mm ID, 68 mm OD

This ball bearing is a single-row deep-groove unit designed for general rotary support where moderate radial and axial loads occur. It features a cylindrical bore and open ends for straightforward assembly and inspection. Constructed from bearing steel with a pressed-steel cage, it is intended for installations that require standardised dimensions and compatibility with ISO 492:2023 tolerancing.

• C3 internal clearance reduces running friction during thermal expansion
• 13,400 N dynamic load rating supports sustained radial loads
• 10,300 N static load rating resists deformation under stationary loads
• 15,200 rpm limiting speed enables high-speed rotation where needed
• Deep-grooved races provide axial load accommodation in both directions

• Suitable for electric motor shaft support in industrial drives
• Ideal for gearbox intermediate shaft radial support
• Used with pulleys and belts in high-speed transmission
• Can be used for conveyor rollers requiring continuous rotation
• Appropriate for pump shafts needing axial load handling

A pressed-steel cage is employed for dimensional stability and adequate retention at higher speeds.

The races are MADE from bearing steel to provide hardness and wear performance under load.

Open ends allow Visual inspection and easier lubrication access during routine servicing.

The component uses deep-grooved raceways that permit radial load support with limited axial capacity in both directions.