Ultimaker Nozzle for use with Ultimaker 2, Olsson Block 0.4 mm
- RS Stock No.:
- 110-1983
- Mfr. Part No.:
- OBN002
- Manufacturer:
- Ultimaker
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
PHP656.54
(exc. VAT)
PHP735.32
(inc. VAT)
- RS Stock No.:
- 110-1983
- Mfr. Part No.:
- OBN002
- Manufacturer:
- Ultimaker
Specifications
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Ultimaker | |
| Product Type | Nozzle | |
| Nozzle Material | Brass | |
| For Use With | Ultimaker 2, Olsson Block | |
| Nozzle Size | 0.4 mm | |
| Standards/Approvals | No | |
| Select all | ||
|---|---|---|
Brand Ultimaker | ||
Product Type Nozzle | ||
Nozzle Material Brass | ||
For Use With Ultimaker 2, Olsson Block | ||
Nozzle Size 0.4 mm | ||
Standards/Approvals No | ||
RoHS Status: Exempt
- COO (Country of Origin):
- NL
Ultimaker 3D Olsson Block Brass Jet Nozzle Printing Parts & Accessoriess
The Ultimaker allows for quick and easy nozzle changes, so different nozzle sizes can be selected to suit each project. Use a smaller nozzle to print fine lines for more detail, or use a larger nozzle to print thicker lines to decrease print duration. The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more.
Note:
This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.
Features and Benefits
Clean them efficiently with cold pulls
Print faster, the plastic flows much easier than in classic nozzles
The 0.4mm is the standard size for a lot of 3D printers
The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer
Use the 0.25mm brass nozzle to print small detailed prints