Ultimaker Nozzle Nozzle for use with Olsson Block, Ultimaker 2 0.25 mm
- RS Stock No.:
- 110-1982
- Mfr. Part No.:
- OBN001
- Manufacturer:
- Ultimaker
Subtotal (1 unit)*
PHP3,200.22
(exc. VAT)
PHP3,584.25
(inc. VAT)
FREE delivery for orders over ₱3,000.00
Last RS stock
- Final 42 unit(s), ready to ship from another location
Units | Per Unit |
|---|---|
| 1 + | PHP3,200.22 |
*price indicative
- RS Stock No.:
- 110-1982
- Mfr. Part No.:
- OBN001
- Manufacturer:
- Ultimaker
Specifications
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Ultimaker | |
| Sub Type | Nozzle | |
| Product Type | Nozzle | |
| For Use With | Olsson Block, Ultimaker 2 | |
| Nozzle Material | Brass | |
| Nozzle Size | 0.25 mm | |
| Standards/Approvals | No | |
| Select all | ||
|---|---|---|
Brand Ultimaker | ||
Sub Type Nozzle | ||
Product Type Nozzle | ||
For Use With Olsson Block, Ultimaker 2 | ||
Nozzle Material Brass | ||
Nozzle Size 0.25 mm | ||
Standards/Approvals No | ||
RoHS Status: Exempt
- COO (Country of Origin):
- NL
Ultimaker 2 Jet Nozzles
The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.
With these special nozzles, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean them efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer.
Use the 0.25mm brass nozzle to print small detailed prints, it's an expert nozzle (RS 110-1982)
The 0.4mm (RS 110-1983) is the standard size for a lot of 3D printers
If you print in wood filaments, this brass nozzle of 0.8mm is perfect for the job (RS 110-1985)
Ultimaker Accessories
Note
This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.
Related links
- Arduino Uno Rev 3 SMD
- RS PRO Stainless Steel Perforated Metal Sheet 500mm x 500mm, 0.55mm Thick
- RS PRO Combination Pliers Straight Tip, 34mm Jaw
- Belden Cat6 Ethernet Cable Grey PVC Sheath, 100m
- RS PRO Phillips Screwdriver 150 mm Blade, 270 mm Overall
- RS PRO 150 mm Stainless Steel Scissors
- Stanley Tylon 8m Tape Measure, Metric & Imperial
- Unistrut 41 x 41mm Slotted Galvanised Steel Strut, 2m Long