Multimeter Leads

Multimeter leads are wires used with analogue and digital multimeters for testing and identifying problems. Multimeter leads are used for the testing of electrical components and circuits. They can be used to measure voltage, current and resistance. Test leads feature a connector, such as a jack, to connect to the multimeter and another connector for testing, such as a probe, crocodile clip or banana plug. Multimeter test leads are considered an essential part of electrical measurement.

Test leads must be in good condition. If the test leads are faulty, this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised. Therefore it is important to keep your test leads in good condition and replace them when necessary. A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be high quality, with the proper markings and product ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.


We have a range of available connector types to suit your needs, including crocodile clips, banana plugs, angled plugs and retractable plugs, as well as application-specific kits, such as automotive, electrical and industrial kits.

We also offer a variety of Multimeters & Accessories for all your testing needs.

Checking your Multimeter Leads:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

...
Read more Read less

Filters

Viewing 121 - 130 of 130 products
Results per page
Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
New
RS Stock No. 212-2593
Mfr. Part No.P01295461Z
PHP2,263.80
Each
units
Insulated Test Lead Set - 4 mm Male No 1.5m - - CAT IV - - -
RS Stock No. 179-7910
Mfr. Part No.AL 8321 / ZPK / 1 / 50 / RT
PHP746.03
Each
units
Test Lead - 4 mm Safety Plug - 56.5mm 19A 600V CAT II 600V -10°C +70°C CAT II
New
RS Stock No. 212-2581
Mfr. Part No.P01295289Z
PHP1,350.99
Each
units
Insulated Test Lead Set - Plug No 1.5m - - CAT III, CAT IV - - -
RS Stock No. 179-9392
Mfr. Part No.BU-P4911B-24-2
PHP1,779.72
Each
units
Test Lead - 4 mm Banana Plug - 609.6mm 20A 600 V, 1000V CAT II 600V - - CAT II
RS Stock No. 212-988
BrandRS PRO
PHP2,598.22
Each
units
Test Lead - Crocodile Clip Yes 1m - 600V CAT III 600V - - CAT III
RS Stock No. 179-7905
Mfr. Part No.SKURZ 6100/19-4 IG 2MB Ni/SW
PHP488.00
Each
units
- - - - - - - - - - -
New
RS Stock No. 212-2596
Mfr. Part No.P01295475Z
PHP2,066.22
Each
units
Insulated Test Lead Set - Plug No 1.5m - - - - - -
RS Stock No. 731-5286
BrandRS PRO
PHP11,222.75
1 Kit(s)
units
Multi Pin Connector Test Kit - Crocodile Clip, Pin Socket, Right Angle Plug - 1.2m 20A 1000V CAT II 1000V - - CAT II
RS Stock No. 125-3735
BrandRS PRO
PHP2,055.75
Each
units
Test Lead Kit - Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug - 1.2m 15A 1000V CAT III 1000V - - CAT III
RS Stock No. 125-3733
BrandRS PRO
PHP3,004.90
Each
units
Test Lead Kit - Crocodile Clip, Right Angle Plug - 1.2m 15A 1000V CAT III 1000V - - CAT III