Multimeter Leads

Multimeter leads are wires used with analogue and digital multimeters for testing and identifying problems. Multimeter leads are used for the testing of electrical components and circuits. They can be used to measure voltage, current and resistance. Test leads feature a connector, such as a jack, to connect to the multimeter and another connector for testing, such as a probe, crocodile clip or banana plug. Multimeter test leads are considered an essential part of electrical measurement.

Test leads must be in good condition. If the test leads are faulty, this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised. Therefore it is important to keep your test leads in good condition and replace them when necessary. A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be high quality, with the proper markings and product ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.


We have a range of available connector types to suit your needs, including crocodile clips, banana plugs, angled plugs and retractable plugs, as well as application-specific kits, such as automotive, electrical and industrial kits.

We also offer a variety of Multimeters & Accessories for all your testing needs.

Checking your Multimeter Leads:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

...
Read more Read less

Filters

Viewing 21 - 40 of 130 products
Results per page
Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
RS Stock No. 726-3633
Mfr. Part No.TL220-1
BrandFluke
PHP5,869.63
Each
units
Industrial Test Lead Kit - Crocodile Clip, Right Angle to Right Angle - 1.6m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 731-5277
BrandRS PRO
PHP2,634.85
Each
units
Test Lead Kit - Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug - 1.2m - 600V CAT III 600V -20°C +70°C CAT III
RS Stock No. 468-7263
Mfr. Part No.TLK-220
BrandFluke
PHP11,460.17
Each
units
Test Lead Kit - - - - - - - - - -
RS Stock No. 334-6602
Mfr. Part No.1632758
BrandPomona
PHP1,532.48
Each
units
Test Lead - - - - - - - - - -
RS Stock No. 612-0835
BrandRS PRO
PHP3,637.51
1 Kit
Kit(s)
Test Lead Kit - Crocodile Clip, Socket - 1.2m 10A - - - - -
RS Stock No. 731-8982
Mfr. Part No.TL80A-1
BrandFluke
PHP6,274.31
Each
units
Electronic Test Lead Kit - Crocodile Clip - 1m 3 A, 5A 300V CAT II 300V - - CAT II
RS Stock No. 340-2421
BrandRS PRO
PHP2,033.70
Each
units
Insulated Test Lead Kit - Crocodile Clip, Retractable Plug, Shrouded Plug, Spade Terminal, Sprung Hook - 1.2m 20A 1000V CAT II 1000V -20°C +70°C CAT II
RS Stock No. 449-9892
Mfr. Part No.TL222
BrandFluke
PHP2,447.77
Each
units
Silicone Test Lead Set - Banana Plug - 1.5m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 705-1954
Mfr. Part No.Fluke i2500-18
BrandFluke
PHP12,480.64
Each
units
Flexible Current Probe - - - 1.8m 2.5kA 600 V, 1000V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 456-0427
Mfr. Part No.TL910
BrandFluke
PHP5,496.22
Each
units
Electronic Test Lead Kit - Spring Loaded Pin - 1m 3A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 775-681
Mfr. Part No.932959001
PHP2,261.07
Each
units
Micro Test Equipment Set - Miniature Crocodile Clip, Spring Loaded Plug, Spring Loaded Socket - 1m - - - -15°C +70°C -
RS Stock No. 731-5172
Mfr. Part No.99.00047
BrandStaubli
PHP1,545.97
Each
units
Test Lead - Right Angle Plug - 1m 19A 1000V CAT II 1000V - - CAT II
RS Stock No. 196-2555
Mfr. Part No.935982257
PHP2,481.21
Each
units
Test Lead Kit - - - - - - - - - -
RS Stock No. 161-6511
BrandRS PRO
PHP818.83
Each
units
Test Lead - Crocodile Clip - 500mm - - - - - -
RS Stock No. 450-9400
Mfr. Part No.935982256
PHP3,126.53
1 Kit
Kit(s)
Test Lead Kit - Crocodile Clip - - - - - -25°C +80°C, +100 °C -
RS Stock No. 705-1945
Mfr. Part No.Fluke i2500-10
BrandFluke
PHP11,196.00
Each
units
Flexible Current Probe - - - 1.8m 2.5kA 600 V, 1000V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 606-0216
Mfr. Part No.TLA-117
PHP843.48
Each
units
Test Lead - Crocodile Clip - 500mm - 100V CAT III 100V - - CAT III
RS Stock No. 731-5273
BrandRS PRO
PHP3,587.91
Each
units
Test Lead Kit - Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug Yes 1.2m - 600V CAT III 600V -20°C +70°C CAT III
RS Stock No. 605-7383
Mfr. Part No.TLA-118
PHP1,013.18
Each
units
Test Lead - Crocodile Clip - 500mm - 100V CAT III 100V - - CAT III
RS Stock No. 405-499
Mfr. Part No.20033
BrandStaubli
PHP5,817.17
Each
units
Test Lead Kit - 2 mm Crocodile Clip - - - - - - - -