Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 21 - 40 of 600 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 613-9738
BrandRS PRO
PHP7.906
Each (In a Pack of 100)
units
Parallel 1.5mm² 16 → 14 AWG 2.5mm² 16.5mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 531-368
BrandRS PRO
PHP7.789
Each (In a Pack of 25)
units
T-Tap 0.75mm² 18 → 14 AWG 2.5mm² 37mm 9.8mm 18AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 119-233
BrandRS PRO
PHP60.154
Each (In a Pack of 10)
units
Butt - 50 mm² 50mm² 40mm 9.6mm - Uninsulated - - - - - -
RS Stock No. 809-2375
BrandRS PRO
PHP4.233
Each (In a Pack of 100)
units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 16mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS Stock No. 841-7677
BrandRS PRO
PHP12.837
Each (In a Pack of 100)
units
Butt - 16 mm² - 30mm 7.5mm - Uninsulated - - - - - -
RS Stock No. 841-7692
BrandRS PRO
PHP45.972
Each (In a Pack of 50)
units
Butt - 70 mm² - 45mm 15mm - Uninsulated - - - - - -
RS Stock No. 534-907
BrandRS PRO
PHP7.774
Each (In a Pack of 100)
units
Closed End 0.5mm² 0.5 → 1.5 mm² 1.5mm² 18.1mm 6.6mm 22AWG Insulated 16AWG - Clear - Nylon -
RS Stock No. 119-182
BrandRS PRO
PHP14.35
Each (In a Pack of 25)
units
Butt - 6 mm² 6mm² 19mm 4mm - Uninsulated - - - - - -
RS Stock No. 809-2385
BrandRS PRO
PHP23.781
Each (In a Pack of 50)
units
Butt - 8 AWG 8mm² 21mm 7mm - Uninsulated 8AWG - - - - -
RS Stock No. 510-8755
BrandRS PRO
PHP305.05
1 Bag of 50
Bag(s)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 27mm 20mm 18AWG Insulated 14AWG - White - PP -
RS Stock No. 613-9788
BrandRS PRO
PHP11.242
Each (In a Pack of 100)
units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 433-078
BrandRS PRO
PHP4.636
Each (In a Pack of 100)
units
Butt 0.5mm² 0.5 → 1.5 mm² 1.5mm² 15mm 1.8mm - Uninsulated - - - - - -
RS Stock No. 809-2369
BrandRS PRO
PHP1.837
Each (In a Pack of 100)
units
Parallel 0.5mm² 22 → 16 AWG 1.5mm² 8mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS Stock No. 841-7673
BrandRS PRO
PHP9.136
Each (In a Pack of 100)
units
Butt - 10 mm² - 23mm 6.6mm - Uninsulated - - - - - -
RS Stock No. 613-9772
BrandRS PRO
PHP8.101
Each (In a Pack of 100)
units
Parallel 0.5mm² 22 → 16 AWG 1.5mm² 16.5mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 119-249
BrandRS PRO
PHP58.417
Each (In a Pack of 10)
units
Butt - 70 mm² 70mm² 43mm 12mm - Uninsulated - - - - - -
RS Stock No. 510-4797
BrandRS PRO
PHP620.99
1 Bag of 100
Bag(s)
Tap - 26 → 22 AWG - 12.5mm 9.2mm 26AWG Insulated 22AWG 2 Blue, White - - -
RS Stock No. 458-0718
BrandRS PRO
PHP46.691
Each (In a Bag of 10)
units
- - - - - - - Insulated - - - - - -
RS Stock No. 809-2388
BrandRS PRO
PHP6.651
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 20mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 178-7215
BrandRS PRO
PHP5.128
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 25.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Nylon -
Related Products
Tin plated copper sleeves with nylon 6.6 insulation ...
Description:
Tin plated copper sleeves with nylon 6.6 insulation makes these items ideal for electrically joining cables or for storing/insulating the ends of spare cables, which may be required at a later date. Wire sizes quoted in the table are for ...
HelaCon connectors are used for fast, easy and ...
Description:
HelaCon connectors are used for fast, easy and reliable connection and distribution of cable and conductors in electrical installation applications.The new generation of HelaCon Plus Mini wire connectors can be applied tool-free using the push-in spring technology. HelaCon Plus Mini ...
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when ...
Push grip insulated wire splice connectors for use ...
Description:
Push grip insulated wire splice connectors for use in electrical installations. These Push Grip push electrical wire connectors are simple to use and do not require any additional tooling. The housings of these splice connectors contain a spring contact for ...