Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 41 - 60 of 597 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 178-7218
BrandRS PRO
PHP10.70
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 125-1943
BrandRS PRO
PHP11.548
Each (In a Pack of 25)
units
Tap 0.25mm² 26 → 24 0.34 - - - Insulated - - Black - Nylon -
RS Stock No. 809-2379
BrandRS PRO
PHP4.654
Each (In a Pack of 100)
units
Parallel 4mm² 12 → 10 AWG 6mm² 8.5mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 178-7198
BrandRS PRO
PHP2.879
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 15mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS Stock No. 178-7173
BrandRS PRO
PHP2.101
Each (In a Bag of 100)
units
- 1.5mm² 16 → 14 AWG 2.5mm² - - 16AWG Uninsulated 14AWG - - 17.8 x 4mm - 17.8mm
RS Stock No. 458-0702
BrandRS PRO
PHP44.936
Each (In a Bag of 10)
units
- - - - - - - Insulated - - - - - -
RS Stock No. 178-7181
BrandRS PRO
PHP5.043
Each (In a Bag of 50)
units
- 0.5mm² 0.5 → 0.75 mm², 22 → 18 AWG 0.75mm² 27mm - 22AWG Insulated 18AWG - Red - PP -
RS Stock No. 178-7229
BrandRS PRO
PHP2.786
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 24.6mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 841-7670
BrandRS PRO
PHP6.224
Each (In a Pack of 100)
units
Butt - 6 mm² - 20mm 5.9mm - Uninsulated - - - - - -
RS Stock No. 178-7221
BrandRS PRO
PHP3.891
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 24.6mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 178-7219
BrandRS PRO
PHP5.128
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25.2mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7234
BrandRS PRO
PHP2.342
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 21mm 8mm 16AWG Insulated 14AWG - Natural - Nylon -
RS Stock No. 178-7211
BrandRS PRO
PHP10.163
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 26mm 4.5mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7183
BrandRS PRO
PHP5.66
Each (In a Bag of 50)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 49mm - 16AWG Insulated 14AWG - Red - PP -
RS Stock No. 178-7187
BrandRS PRO
PHP73.01
Each (In a Bag of 50)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 41mm 3.4mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 178-7185
BrandRS PRO
PHP47.485
Each (In a Bag of 50)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 36mm 2.3mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7217
BrandRS PRO
PHP3.525
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 25.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 809-2388
BrandRS PRO
PHP6.651
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 20mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 178-7223
BrandRS PRO
PHP7.976
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 26.5mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS Stock No. 178-7199
BrandRS PRO
PHP2.171
Each (In a Bag of 100)
units
- 0.2mm² 0.2 → 0.5 mm², 26 → 22 AWG 0.5mm² 12mm 2.1mm 26AWG Uninsulated 22AWG - - - - -
Related Products
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
Tin plated copper sleeves with nylon 6.6 insulation ...
Description:
Tin plated copper sleeves with nylon 6.6 insulation makes these items ideal for electrically joining cables or for storing/insulating the ends of spare cables, which may be required at a later date. Wire sizes quoted in the table are for ...
Push grip insulated wire splice connectors for use ...
Description:
Push grip insulated wire splice connectors for use in electrical installations. These Push Grip push electrical wire connectors are simple to use and do not require any additional tooling. The housings of these splice connectors contain a spring contact for ...
Push grip insulated wire splice connectors for use ...
Description:
Push grip insulated wire splice connectors for use in electrical installations. These Push Grip push electrical wire connectors are simple to use and do not require any additional tooling. The housings of these splice connectors contain a spring contact for ...