Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 81 - 100 of 600 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 178-7179
BrandRS PRO
PHP9.883
Each (In a Bag of 50)
units
- 0.5mm² 0.5 → 0.75 mm², 26 → 22 AWG 0.75mm² 33mm - 26AWG Insulated 22AWG - Red - PP -
RS Stock No. 178-7198
BrandRS PRO
PHP2.879
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 15mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS Stock No. 178-7224
BrandRS PRO
PHP2.934
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 24.6mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 178-7217
BrandRS PRO
PHP3.525
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 25.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7236
BrandRS PRO
PHP4.949
Each (In a Bag of 50)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 25.5mm 10mm 12AWG Insulated 10AWG - Natural - Nylon -
RS Stock No. 510-4898
BrandRS PRO
PHP190.25
1 Bag of 50
Bag(s)
Tap 0.5mm² 20 → 18 AWG 0.75mm² 34mm 35mm 20AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7178
BrandRS PRO
PHP2.669
Each (In a Bag of 100)
units
Open Barrel 0.5mm² - 0.75mm² - - 22AWG Uninsulated 18AWG - - 19 x 6.5mm - 19mm
RS Stock No. 178-7254
BrandRS PRO
PHP9.331
Each (In a Bag of 100)
units
- - 8 AWG, 10 mm² 10mm² 10mm 8mm - Uninsulated 8AWG - - - - -
RS Stock No. 510-4860
BrandRS PRO
PHP200.69
1 Bag of 50
Bag(s)
Tap 1.5mm² 16 → 14 AWG 2.5mm² 49mm 20mm 16AWG Insulated 14AWG - Blue, Red - Nylon -
RS Stock No. 809-2363
BrandRS PRO
PHP3.899
Each (In a Pack of 100)
units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 15mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS Stock No. 178-7219
BrandRS PRO
PHP5.128
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25.2mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7181
BrandRS PRO
PHP5.043
Each (In a Bag of 50)
units
- 0.5mm² 0.5 → 0.75 mm², 22 → 18 AWG 0.75mm² 27mm - 22AWG Insulated 18AWG - Red - PP -
RS Stock No. 178-7206
BrandRS PRO
PHP8.109
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 458-0724
BrandRS PRO
PHP52.917
Each (In a Bag of 10)
units
- - - - - - - Insulated - - - - - -
RS Stock No. 841-7670
BrandRS PRO
PHP6.224
Each (In a Pack of 100)
units
Butt - 6 mm² - 20mm 5.9mm - Uninsulated - - - - - -
RS Stock No. 178-8396
BrandRS PRO
PHP2.019
Each (In a Bag of 100)
units
- - 1.25 mm², 22 → 16 AWG 1.25mm² 15.2mm 6mm 22AWG Insulated 16AWG - Natural - Nylon -
RS Stock No. 178-7213
BrandRS PRO
PHP10.457
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 27mm 5.2mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7227
BrandRS PRO
PHP7.268
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 26.5mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS Stock No. 178-8348
BrandRS PRO
PHP5.401
Each (In a Bag of 100)
units
- 1.5mm² - 2.5mm² - - 16AWG Insulated 14AWG - - 7 x 3.9mm - 7mm
RS Stock No. 178-7202
BrandRS PRO
PHP5.549
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25mm 4mm 22AWG Insulated 16AWG - Red - PC -
Related Products
HelaCon connectors are used for fast, easy and ...
Description:
HelaCon connectors are used for fast, easy and reliable connection and distribution of cable and conductors in electrical installation applications.The new generation of HelaCon Plus Mini wire connectors can be applied tool-free using the push-in spring technology. HelaCon Plus Mini ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...
Poke-Home wire-to-wire connectors have been proven to be ...
Description:
Poke-Home wire-to-wire connectors have been proven to be very simple and reliable over the past several years. Until today, they have been focused on the light industrial wire gauge ranges of 18AWG to 24AWG. The latest product has just been ...
This range of push-in wire connectors are used ...
Description:
This range of push-in wire connectors are used for fast, easy, reliable connection and distribution of cable and conductors in electrical housing applications within junction boxes and control panels.,Used within a typical range of housing voltage up to 450 volts.,Variety ...