PR Electronics 2 Channel Galvanic Barrier, ATEX
- RS Stock No.:
- 796-6954
- Mfr. Part No.:
- 5104BB
- Manufacturer:
- PR Electronics
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 796-6954
- Mfr. Part No.:
- 5104BB
- Manufacturer:
- PR Electronics
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | PR Electronics | |
| Product Type | Galvanic Barrier | |
| Number of Channels | 2 | |
| Barrier Type | Galvanic Barrier | |
| Mount Type | DIN Rail | |
| Hazardous Area Certification | ATEX | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Maximum Safety Voltage | 250V ac | |
| Maximum Safety Current | 400mA | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | Zone 2, SIL 2/3 Full Assessment IEC 61508, FM, DNV-GL / EU-RO marine, SIL 2 Full Assessment IEC 61508, EAC, UL 61010 / 508, NE 43, SIL 2, Zone 2-DIV 2, Hardware Assessment, IECEX, ATEX, NE 21 | |
| Series | 5100 | |
| Select all | ||
|---|---|---|
Brand PR Electronics | ||
Product Type Galvanic Barrier | ||
Number of Channels 2 | ||
Barrier Type Galvanic Barrier | ||
Mount Type DIN Rail | ||
Hazardous Area Certification ATEX | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Maximum Safety Voltage 250V ac | ||
Maximum Safety Current 400mA | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals Zone 2, SIL 2/3 Full Assessment IEC 61508, FM, DNV-GL / EU-RO marine, SIL 2 Full Assessment IEC 61508, EAC, UL 61010 / 508, NE 43, SIL 2, Zone 2-DIV 2, Hardware Assessment, IECEX, ATEX, NE 21 | ||
Series 5100 | ||
PR Electronics 5104B Ex Repeater / Power Supply
PR Electronics 5104B intrinsically safe repeater is a power supply and safety barrier for 2-wire transmitters mounted in a hazardous area. The 5104B signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
Features and Benefits
• 1 : 1 or signal conversion of analogue current / voltage signals;• 3.75 kV ac galvanic isolation;• Loop supply > 17.1 V;• Inputs, outputs and supply are floating and galvanically separated;• Output can be connected either as an active current / voltage transmitter or as a 2-wire transmitter;• Low response time;• Universal supply by AC or DC;• DIN Rail mounting (vertically or horizontally)
PR Electronics - Ex Interfaces
Note
Not suitable for new installations requiring certification to the latest ATEX standards - see ATEX certificate DEMKO 99ATEX127186 and EU Declaration of Conformity for details