Nexperia PCMF2USB3SZ 2-Element Uni-Directional ESD Protection Diode, 1500 W, 10-Pin WLCSP
- RS Stock No.:
- 153-1894
- Mfr. Part No.:
- PCMF2USB3SZ
- Manufacturer:
- Nexperia
This image is representative of the product range
Bulk discount available
Subtotal (1 pack of 10 units)*
PHP522.33
(exc. VAT)
PHP585.01
(inc. VAT)
FREE delivery for orders over ₱3,000.00
Temporarily out of stock
- Shipping from September 08, 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit | Per Pack* |
|---|---|---|
| 10 - 40 | PHP52.233 | PHP522.33 |
| 50 - 490 | PHP50.667 | PHP506.67 |
| 500 - 990 | PHP49.147 | PHP491.47 |
| 1000 - 2490 | PHP47.675 | PHP476.75 |
| 2500 + | PHP46.244 | PHP462.44 |
*price indicative
- RS Stock No.:
- 153-1894
- Mfr. Part No.:
- PCMF2USB3SZ
- Manufacturer:
- Nexperia
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Nexperia | |
| Diode Configuration | Single | |
| Direction Type | Uni-Directional | |
| Product Type | ESD Protection Diode | |
| Minimum Breakdown Voltage Vbr | 6.45V | |
| Mount Type | Surface Mount | |
| Package Type | WLCSP | |
| Maximum Reverse Stand-off Voltage Vwm | 5.8V | |
| Pin Count | 10 | |
| Peak Pulse Power Dissipation Pppm | 1500W | |
| Minimum Operating Temperature | -40°C | |
| Test Current It | 1mA | |
| Maximum Peak Pulse Current Ippm | 100A | |
| ESD Protection | Yes | |
| Clamping Voltage VC | 10.5V | |
| Maximum Operating Temperature | 85°C | |
| Number of Elements per Chip | 2 | |
| Height | 0.38mm | |
| Length | 1.62mm | |
| Width | 1.22 mm | |
| Maximum Reverse Leakage Current | 100nA | |
| Select all | ||
|---|---|---|
Brand Nexperia | ||
Diode Configuration Single | ||
Direction Type Uni-Directional | ||
Product Type ESD Protection Diode | ||
Minimum Breakdown Voltage Vbr 6.45V | ||
Mount Type Surface Mount | ||
Package Type WLCSP | ||
Maximum Reverse Stand-off Voltage Vwm 5.8V | ||
Pin Count 10 | ||
Peak Pulse Power Dissipation Pppm 1500W | ||
Minimum Operating Temperature -40°C | ||
Test Current It 1mA | ||
Maximum Peak Pulse Current Ippm 100A | ||
ESD Protection Yes | ||
Clamping Voltage VC 10.5V | ||
Maximum Operating Temperature 85°C | ||
Number of Elements per Chip 2 | ||
Height 0.38mm | ||
Length 1.62mm | ||
Width 1.22 mm | ||
Maximum Reverse Leakage Current 100nA | ||
Common Mode filter for USB ports, No room for compromise, The most common Camera and display Interface used now for portable devices is the differential MIPI Interface running at RF frequencies. To allow operation at typical GSM/3G/LTE frequencies, a strong common-mode suppression over all bands and higher harmonics is needed. At the same time, a wide differential passband is needed to keep signal integrity. Since ESD can enter through gaps in the portable device, strong ESD protection is needed to avoid damage of the electronics or re-setting the system due to ESD strikes
Strong common-mode suppression > 14 dB in the range between 500 MHz and > 8 GHz
Wide passband > 2 GHz, ensuring signal integrity for all MIPI frequencies
ESD ruggedness > 15 kV contact, far exceeding IEC 61000-4-2 (8 kV contact)
Deep snap-back for optimized SoC protection against ESD strikes
Very thin package (0.5 mm max package height)
All LVDS signals needing a passband up to 2 GHz