Nexperia 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP

RS Stock No.:: 153-0754
Mfr. Part No.:: PESD1USB3SZ
Manufacturer:: Nexperia

Nexperia 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP

This image is representative of the product range

Bulk discount available

Subtotal (1 reel of 4500 units)*

PHP56,925.00

(exc. VAT)

PHP63,765.00

(inc. VAT)

Stock information currently inaccessible - Please check back later

Units	Per Unit	Per Reel*
4500 - 4500	PHP12.65	PHP56,925.00
9000 - 18000	PHP12.535	PHP56,407.50
22500 +	PHP12.374	PHP55,683.00

*price indicative

RS Stock No.:: 153-0754
Mfr. Part No.:: PESD1USB3SZ
Manufacturer:: Nexperia

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Nexperia
	Product Type	ESD Protection Diode
	Direction Type	Uni-Directional
	Minimum Breakdown Voltage Vbr	6V
	Mount Type	Surface
	Package Type	WLCSP
	Pin Count	5
	Maximum Peak Pulse Current Ippm	8A
	ESD Protection	Yes
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Number of Elements per Chip	2
	Height	0.38mm
	Series	PESD
	Standards/Approvals	IEC 61000-4-2
	Length	1.22mm
	Maximum Reverse Leakage Current	100nA
	Automotive Standard	AEC-Q101

	Select all
	Brand Nexperia
	Product Type ESD Protection Diode
	Direction Type Uni-Directional
	Minimum Breakdown Voltage Vbr 6V
	Mount Type Surface
	Package Type WLCSP
	Pin Count 5
	Maximum Peak Pulse Current Ippm 8A
	ESD Protection Yes
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Number of Elements per Chip 2
	Height 0.38mm
	Series PESD
	Standards/Approvals IEC 61000-4-2
	Length 1.22mm
	Maximum Reverse Leakage Current 100nA
	Automotive Standard AEC-Q101

Common Mode filter for USB ports, No room for compromise, The most common Camera and display Interface used now for portable devices is the differential MIPI Interface running at RF frequencies. To allow operation at typical GSM/3G/LTE frequencies, a strong common-mode suppression over all bands and higher harmonics is needed. At the same time, a wide differential passband is needed to keep signal integrity. Since ESD can enter through gaps in the portable device, strong ESD protection is needed to avoid damage of the electronics or re-setting the system due to ESD strikes

Strong common-mode suppression > 14 dB in the range between 500 MHz and > 8 GHz

Wide passband > 2 GHz, ensuring signal integrity for all MIPI frequencies

ESD ruggedness > 15 kV contact, far exceeding IEC 61000-4-2 (8 kV contact)

Deep snap-back for optimized SoC protection against ESD strikes

Very thin package (0.5 mm max package height)

All LVDS signals needing a passband up to 2 GHz

Nexperia 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP

Related links