RS PRO Test Lead, 80 V, Red, Black, 1100 mm Lead Length

The RS Pro Test Leads are suitable for battery testers. The offsetting connection for 3 point connection is done by finding the short-circuit screw in the middle of the short-circuit board as center. Find two holes on left and right of the center which has the same distance between the two ends of the battery under test. Then insert the SENSE pins into the holes and press down the probes to let the SOURCE touch the copper foil on the PCB board to complete the 3-point connection. When performing offsetting, it is necessary to keep the probe and the short circuit board in good contact condition to avoid shaking and affect the measurement results.

4 Wire Type