PR Electronics 3100 Series Isolating Signal Converter, Current, Voltage Input, Current, Voltage Output, 16.8 →

RS Stock No.:: 796-7086
Mfr. Part No.:: 3109
Manufacturer:: PR Electronics

PR Electronics 3100 Series Isolating Signal Converter, Current, Voltage Input, Current, Voltage Output, 16.8 →

Subtotal (1 unit)**

PHP19,856.22

(exc. VAT)

PHP22,238.97

(inc. VAT)

40 In Global stock for delivery NCR Plus within 10 working day(s), rest of PH within 14 working days*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for over PHP3,000.00 (ex VAT)

Real time qty checker

Units	Per Unit
1 +	PHP19,856.22

**price indicative

RS Stock No.:: 796-7086
Mfr. Part No.:: 3109
Manufacturer:: PR Electronics

3109 Signal Converter and Splitter

PR 3109 isolated signal converter and splitter for the isolation and conversion of DC signals. Designed for galvanic isolation of current and voltage signals to SCADA systems or PLC equipment.
The PR 3000 series is a family of compact, fast, and easy to use 6 mm signal conditioners with exceptional performance and EMC immunity for dedicated applications – including indoor and outdoor environments with wide temperature fluctuations. Designed and rated to operate between 25 ˚C to +70 ˚C, making these devices a good choice in applications where the ambient temperature changes greatly. These high-performance devices utilize our innovative microprocessor technology to provide high base accuracy, low power consumption, and maximum protection against error due to electromagnetic noise.

Features and Benefits

• High basic 0.05% accuracy in all available signal ranges

• 2.5 kVAC isolation and have excellent noise immunity

• NAMUR NE21 burst A criteria

• Transmits rapid changes in process measurements to PLC/DCS for fast and accurate monitoring of critical signals

• Low temperature coefficient better than 0.01% / °C in a wide -25 to +70°C ambient temperature range for precise measurements

• Long term accuracy better than 0.1% / 3 years with no need for re-calibration

• Installation in ATEX Ex zone 2 / IECEx Zone 2 / FM division 2

DIP-switch programming

Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.

Mounting

Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.

High level of isolation

Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.

Device status indicators

A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.

Over voltage- / polarity protection

All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.

PR Electronics DIN Rail Mounting

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	PR Electronics
	Module Type	Signal Isolator
	Input Signal Type	Current, Voltage
	Output Signal Type	Current, Voltage
	Input Range	0 → 10.25 V, 0 → 20.5mA
	Output Range	0 → 10 V dc, 0 → 20.5mA
	Supply Voltage	16.8 → 31.2V dc
	Hazardous Area Certification	ATEX
	Mounting Type	DIN Rail Mount
	Operating Temperature Range	-25 → +70°C
	Series	3100
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	+70°C

	Select all
	Brand PR Electronics
	Module Type Signal Isolator
	Input Signal Type Current, Voltage
	Output Signal Type Current, Voltage
	Input Range 0 → 10.25 V, 0 → 20.5mA
	Output Range 0 → 10 V dc, 0 → 20.5mA
	Supply Voltage 16.8 → 31.2V dc
	Hazardous Area Certification ATEX
	Mounting Type DIN Rail Mount
	Operating Temperature Range -25 → +70°C
	Series 3100
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature +70°C