Phoenix Contact MACX MCR Series Signal Conditioner, Current/Voltage Input, Current Output, 30V dc, 8 V dc Supply, ATEX
- RS Stock No.:
- 196-0434
- Mfr. Part No.:
- 2902063
- Manufacturer:
- Phoenix Contact
Bulk discount available
Subtotal (1 unit)*
PHP12,316.45
(exc. VAT)
PHP13,794.42
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per Unit |
|---|---|
| 1 - 4 | PHP12,316.45 |
| 5 + | PHP11,946.96 |
*price indicative
- RS Stock No.:
- 196-0434
- Mfr. Part No.:
- 2902063
- Manufacturer:
- Phoenix Contact
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Phoenix Contact | |
| Product Type | Signal Conditioner | |
| Input Signal Type | Current/Voltage | |
| Output Signal Type | Current | |
| Input Range | 2 → 40 mA, 50 mV → 30 V | |
| Output Range | 4 → 20 mA | |
| Supply Voltage | 30, 8V dc | |
| Hazardous Area Certification | ATEX | |
| Mount Type | DIN Rail | |
| Maximum Operating Temperature | 70°C | |
| Minimum Operating Temperature | -40°C | |
| Terminal Type | Push-in | |
| IP Rating | IP20 | |
| Standards/Approvals | MACX, MCR | |
| Series | MACX MCR | |
| Select all | ||
|---|---|---|
Brand Phoenix Contact | ||
Product Type Signal Conditioner | ||
Input Signal Type Current/Voltage | ||
Output Signal Type Current | ||
Input Range 2 → 40 mA, 50 mV → 30 V | ||
Output Range 4 → 20 mA | ||
Supply Voltage 30, 8V dc | ||
Hazardous Area Certification ATEX | ||
Mount Type DIN Rail | ||
Maximum Operating Temperature 70°C | ||
Minimum Operating Temperature -40°C | ||
Terminal Type Push-in | ||
IP Rating IP20 | ||
Standards/Approvals MACX, MCR | ||
Series MACX MCR | ||
Phoenix Contact Signal Conditioner, Output Loop-Powered 2-Way Isolator Type, 30V Maximum Input Voltage - MINI MCR-2-UI-I-OLP-PT - 2902063
Looking for a device that can convert electronic signals? Take charge with this Phoenix Contact signal conditioner. When supplied with inputs between 0 and 40mA, it manipulates them into outputs with a maximum current of 32mA. This lets you prepare your transmissions so they're easier to process later down the line in your network. For a fast and flexible setup, the unit uses a push-in method and is mountable in any position.
Humidity is no problem for this product, as it's built to withstand 5 to 95% RH. This makes it suitable for damp areas that experience high levels of non-condensing water vapour. Plus, its PBT housing is resistant to chemicals for a longer service life in heavy-duty applications. You can get an easy handle on the unit, without worrying about shocks, as it has an IP20 rating.
• Configurable input to allow for greater versatility
• Compact dimensions of 6.2 (W) x 110.5 (H) x 120.5mm (D) make this a space-saving component
• Broad operating temperature range between -40 and +70°C for use in challenging environments
• Overvoltage category II rating for protection from unplanned voltage surges
Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input configurable via DIP switch. Push-in connection technology, standard configuration. Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation, conversion, and filtering of analog signals. The output loop-powered isolator allows operation at an active analog input module. The device is supplied via the current loop of the controller. On the input side, standard analog signals and non-standard analog signals can be connected, ranging from 2 mA or 50 mV up to 40 mA or 30 V. These are converted to 4 mA ... 20 mA signals. You can configure the input signals via DIP switches. The measuring transducer supports NFC communication.