INA SL045013-PP 65 mm ID Roller Bearing, 100 mm OD
- RS Stock No.:
- 191-4471
- Mfr. Part No.:
- SL045013-PP
- Manufacturer:
- INA
Bulk discount available
Subtotal (1 unit)*
PHP21,530.01
(exc. VAT)
PHP24,113.61
(inc. VAT)
FREE delivery for orders over ₱3,000.00
Temporarily out of stock
- Shipping from June 09, 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 1 - 4 | PHP21,530.01 |
| 5 - 9 | PHP20,667.35 |
| 10 + | PHP20,237.02 |
*price indicative
- RS Stock No.:
- 191-4471
- Mfr. Part No.:
- SL045013-PP
- Manufacturer:
- INA
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 65mm | |
| Race Width | 46mm | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Static Load Rating | 215kN | |
| Dynamic Load Rating | 130kN | |
| End Type | Sealed | |
| Outside Diameter | 100mm | |
| Select all | ||
|---|---|---|
Brand INA | ||
Product Type Roller Bearing | ||
Inside Diameter 65mm | ||
Race Width 46mm | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Static Load Rating 215kN | ||
Dynamic Load Rating 130kN | ||
End Type Sealed | ||
Outside Diameter 100mm | ||
Bearing arrangements are subjected to particularly high radial loads
Not only particularly high radial forces but also high axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage space-saving designs are required despite very high load
The bearings should be separable for easier mounting (bearings with non-locating bearing function)