Schneider Electric Harmony Series Light Block, 230V, 240 V, White Light

This light Block provides a panel-mounted signalling solution with an integrated LED illumination for 22mm control heads, designed to be mounted at the rear of an enclosure and powered from a 230 to 240V supply. It is intended for industrial control and instrumentation environments requiring a compact, steady white indicator.

• Low current draw of 14 mA reduces control-circuit load
• Wide supply tolerance 195 to 264V AC for voltage variation resilience
• Long rated service life of 100,000 h at 25 °C for reduced maintenance
• Screw clamp terminals accept up to 2x1.5mm² for secure connections
• Operating temperature range −40 °C to 70 °C suits harsh environments
• IP20 protection and vibration resistance for panel-mounted stability

• Suitable for automation panels requiring steady white status indication
• Ideal for retrofit of 22mm control and signalling units
• Used with industrial enclosures needing rear-mounted illumination
• Can be used for electrical control racks in manufacturing plants

It uses screw clamp terminals that accept up to 2x1.5mm² with suitable ferrules or a single conductor ≥0.22mm² without ferrules, tightened to 0.8 to 1.2 N·m.

It withstands fast transients to 2 kV, electromagnetic fields to 10 V/m and electrostatic discharge to 6 kV on contact and 8 kV in air.

The device resists vibration at 5 g n (12 to 500 Hz) and shock up to 50 g n for short durations, meeting relevant IEC test methods.

In EU markets it must be collected separately under WEEE regulations and must not be discarded with general waste.

UL, CSA

IEC, JIS