Pico Technology 9402-05 CDR PicoScope 9000 Series, 5GHz PC Based Oscilloscope, 2 Analogue Channels

The PicoScope 9400 Series sampler-extended real-time oscilloscopes (SXRTOs) have two or four high-bandwidth 50 Ω input channels with market-leading ADC, timing and display resolutions for accurately measuring and visualizing high-speed analogue and data signals. They are ideal for capturing pulse and step transitions down to 22 ps, impulse down to 45 ps, and clocks and data eyes to 11 Gb/s (with optional 5 or 8 Gb/s clock recovery).

The PicoScope SXRTOs offer random sampling, which can readily analyse high-bandwidth applications that involve repetitive signals or clock-related streams.

The SXRTO is fast: random sampling, persistence displays and statistics all build quickly.

The PicoScope 9400 Series has a built-in internal trigger on every channel, with pre-trigger random sampling to well above the Nyquist (real-time) sampling rate. Bandwidth is up to 16 GHz behind a 50 Ω SMA(f) input, and three acquisition modes—real-time, random and roll—all capture at 12-bit resolution into a shared memory of up to 250 kS.

The touch-compatible PicoSample 4 software is derived from our existing, and highly regarded, PicoSample 3 sampling oscilloscope software, which embodies over ten years of development, customer feedback and optimization.

The price you pay for your PicoScope SXRTO is the price you pay for everything – we don’t charge you for software features or updates.

The display can be resized to fit any window and fully utilize available display resolution, 4K and even larger or across multiple monitors. Four independent zoom channels can show you different views of your data down to a resolution of 0.4 ps. Most of the controls and status panels can be shown or hidden according to your application, allowing you to make optimal use of the display area.

12-bit 500 MS/s ADCs, ±800 mV full-scale input range
Pulse, eye and mask testing down to 45 ps and up to 11 Gb/s
Intuitive and configurable touch-compatible Windows user interface
Comprehensive built-in measurements, zooms, data masks, histograms
10 mV/div to 250 mV/div digital gain ranges
Up to 250 kS trace length, shared between channels
Optional clock recovery trigger up to 8 Gb/s
Optional recovered clock and data outputs

Telecom and radar test, service and manufacturing
Optical fibre, transceiver and laser testing (optical to electrical conversion not included)
RF, microwave and gigabit digital system measurements
Signal, eye, pulse and impulse characterization
Precision timing and phase analysis
Digital system design and characterization
Eye diagram, mask and limits test up to 8 Gb/s
Clock and data recovery at up to 8 Gb/s
Ethernet, HDMI 1, PCI, SATA and USB 2.0
Semiconductor characterization
Signal, data and pulse/impulse integrity and pre-compliance testing

PicoScope 9400 Series sampler-extended real-time oscilloscope (SXRTO)
PicoSample 4 software supplied on USB stick
Free software updates from www.picotech.com
Quick start guide
12 V power supply, IEC inlet
3 x localized IEC mains leads
USB cable, 1.8 m
PicoWrench N / SMA / PC3.5 / K combination wrench
Storage / carry case
LAN cable, 1 m (9404 models only)

Your PicoScope 9400 Series oscilloscope kit contains the following items:

CFR-47 FCC (EMC), EN61326-1:2013 (EMC) and EN61010-1:2010 (LVD)