Nexperia 74HC4051PW,118 Demultiplexer, 1 74HC 1 x 8:1, Non-Inverting, Demultiplexer, Multiplexer, 16-Pin TSSOP
- RS Stock No.:
- 170-7982
- Mfr. Part No.:
- 74HC4051PW,118
- Manufacturer:
- Nexperia
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 170-7982
- Mfr. Part No.:
- 74HC4051PW,118
- Manufacturer:
- Nexperia
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Nexperia | |
| Product Type | Demultiplexer | |
| Logic Family | 74HC | |
| Pin Count | 16 | |
| Number of Elements per Chip | 1 | |
| Output Type | Single Ended | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Configuration | 1 x 8:1 | |
| Package Type | TSSOP | |
| Minimum Supply Voltage | 2V | |
| Maximum Supply Voltage | 10V | |
| Minimum Operating Temperature | -40°C | |
| Maximum On State Resistance | 180Ω | |
| Multiplexer/Demultiplexer | Demultiplexer, Multiplexer | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Width | 4.5mm | |
| Length | 5.1mm | |
| Series | 74HC4051 | |
| Height | 950μm | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Nexperia | ||
Product Type Demultiplexer | ||
Logic Family 74HC | ||
Pin Count 16 | ||
Number of Elements per Chip 1 | ||
Output Type Single Ended | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Configuration 1 x 8:1 | ||
Package Type TSSOP | ||
Minimum Supply Voltage 2V | ||
Maximum Supply Voltage 10V | ||
Minimum Operating Temperature -40°C | ||
Maximum On State Resistance 180Ω | ||
Multiplexer/Demultiplexer Demultiplexer, Multiplexer | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Width 4.5mm | ||
Length 5.1mm | ||
Series 74HC4051 | ||
Height 950μm | ||
Automotive Standard No | ||
The 74HC4051, 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Reduced signal attenuation results in low switching losses
Reduced total harmonic distortion for high quality audio switching
Enable multiplexing of analog sensor signals - reduce number of ADC
Integrated level shifting of control signals interface to lower voltage controllers
Low ON resistance and ON resistance flatness
Low switch leakage
Wide supply voltage
Low input threshold input options
Over-voltage tolerant options
High ESD protection
Related links
- Nexperia 74HC4051D 1 74HC 1 x 8:1 Demultiplexer 16-Pin SO-16
- Nexperia 74HCT4051D 1 74HCT SP8T Multiplexer 16-Pin SO-16
- Nexperia 74HC251D 1 CMOS Single 8:1 Multiplexer, 16-Pin SO-16
- Nexperia HEF4053BT 3 HEF Emergency Eyewash Dign Demultiplexer 16-Pin SO
- Nexperia 74LVC157APW 4 CMOS Quad 2:1 Multiplexer, 16-Pin TSSOP
- onsemi Multiplexer Switch IC Non-Inverting 6-Pin SC-70
- onsemi FSA3157P6X Multiplexer Switch IC Non-Inverting 6-Pin SC-70
- Nexperia 74HC4051PW 1 CMOS Single 8 x 1 Demultiplexer, 16-Pin TSSOP