onsemi, DC Motor Motor Driver IC 28-Pin, SOIC
- RS Stock No.:
- 186-1270
- Mfr. Part No.:
- NCV7708FDWR2G
- Manufacturer:
- onsemi
This image is representative of the product range
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 186-1270
- Mfr. Part No.:
- NCV7708FDWR2G
- Manufacturer:
- onsemi
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Motor Type | DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | Half Bridge | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Output Current | 500mA | |
| Pin Count | 28 | |
| Minimum Supply Voltage | 3.15V | |
| Maximum Supply Voltage | 5.25V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 5MHz | |
| Maximum Operating Temperature | 150°C | |
| Length | 18.05mm | |
| Height | 2.36mm | |
| Series | NCV7708 | |
| Standards/Approvals | No | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 3mA | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Motor Type DC Motor | ||
Product Type Motor Driver IC | ||
Configuration Half Bridge | ||
Mount Type Surface | ||
Package Type SOIC | ||
Output Current 500mA | ||
Pin Count 28 | ||
Minimum Supply Voltage 3.15V | ||
Maximum Supply Voltage 5.25V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 5MHz | ||
Maximum Operating Temperature 150°C | ||
Length 18.05mm | ||
Height 2.36mm | ||
Series NCV7708 | ||
Standards/Approvals No | ||
Automotive Standard AEC-Q100 | ||
Supply Current 3mA | ||
The NCV7708F is a fully protected Hex−Half Bridge−Driver designed specifically for automotive and industrial motion control applications. The six low and high side drivers are freely configurable and can be controlled separately. This allows for high side, low side, and H−Bridge control. H−Bridge control provides forward, reverse, brake, and high impedance states. The drivers are controlled via a standard SPI interface.
Ultra Low Quiescent Current Sleep Mode
Six Independent High−Side and Six independent Low−Side Drivers
Integrated Freewheeling Protection (LS and HS)
Internal Upper and Lower Clamp Diodes
Configurable as H−Bridge Drivers
RDS(on) = 0.6 Ω (typ)
5 MHz SPI Control
SPI Valid Frame Detection
Compliance with 5 V and 3.3 V Systems
Over- and undervoltage Lockout
Fault Reporting
Current Limit
Overtemperature Protection
Internally Fused Lead in SOIC−28 Packaged for Better Thermal Performance
SSOP-24 NB EPAD
Applications
Automotive
Industrial
DC Motor Management
End Products
HVAC