Honeywell DTF2 Series Plunger Limit Switch, 2 NO/2 NC, Die Cast Aluminium Housing, 250V
- RS Stock No.:
- 808-7594
- Mfr. Part No.:
- DTF2-2RN-LH
- Manufacturer:
- Honeywell
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 808-7594
- Mfr. Part No.:
- DTF2-2RN-LH
- Manufacturer:
- Honeywell
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Honeywell | |
| Product Type | Limit Switch | |
| Actuator Type | Plunger | |
| Contact Configuration | 2 NO/2 NC | |
| Housing Material | Die Cast Aluminium | |
| Contact Type | Snap Action | |
| Terminal Type | Screw | |
| Series | DTF2 | |
| Switching AC Voltage | 250V | |
| Minimum Operating Temperature | -32°C | |
| Maximum Operating Temperature | 71°C | |
| Width | 33.02mm | |
| Standards/Approvals | UL, CSA, RoHS | |
| Length | 101.6mm | |
| Depth | 54.86mm | |
| Hazardous Area Certification | NO | |
| Operating Force | 11.2N | |
| Mounting Orientation | Vertical | |
| Conduit Entry | 12.7 mm | |
| Select all | ||
|---|---|---|
Brand Honeywell | ||
Product Type Limit Switch | ||
Actuator Type Plunger | ||
Contact Configuration 2 NO/2 NC | ||
Housing Material Die Cast Aluminium | ||
Contact Type Snap Action | ||
Terminal Type Screw | ||
Series DTF2 | ||
Switching AC Voltage 250V | ||
Minimum Operating Temperature -32°C | ||
Maximum Operating Temperature 71°C | ||
Width 33.02mm | ||
Standards/Approvals UL, CSA, RoHS | ||
Length 101.6mm | ||
Depth 54.86mm | ||
Hazardous Area Certification NO | ||
Operating Force 11.2N | ||
Mounting Orientation Vertical | ||
Conduit Entry 12.7 mm | ||
DTF2 Medium Duty Limit Switches
The DTF2 limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.
Cast aluminium housing
Approvals
UL, CSA.