Texas Instruments Instrumentation Amplifier, 2 mV Offset 1 MHz, 14-Pin 6.5 mA PDIP
- RS Stock No.:
- 923-3662
- Mfr. Part No.:
- PGA202KP
- Manufacturer:
- Texas Instruments
This image is representative of the product range
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 923-3662
- Mfr. Part No.:
- PGA202KP
- Manufacturer:
- Texas Instruments
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Texas Instruments | |
| Product Type | Instrumentation Amplifier | |
| Package Type | PDIP | |
| Number of Channels | 1 | |
| Mount Type | Through Hole | |
| Pin Count | 14 | |
| Minimum Supply Voltage | 6V | |
| Maximum Supply Voltage | 18V | |
| Vos - Input Offset Voltage | 2 mV | |
| Minimum Operating Temperature | 0°C | |
| Slew Rate | 15V/μs | |
| CMRR - Common Mode Rejection Ratio | 80dB | |
| Maximum Operating Temperature | 70°C | |
| Series | PGA202 | |
| Standards/Approvals | No | |
| GBP - Gain Bandwidth Product | 1MHz | |
| Length | 19.3mm | |
| Height | 4.57mm | |
| Supply Current | 6.5mA | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Texas Instruments | ||
Product Type Instrumentation Amplifier | ||
Package Type PDIP | ||
Number of Channels 1 | ||
Mount Type Through Hole | ||
Pin Count 14 | ||
Minimum Supply Voltage 6V | ||
Maximum Supply Voltage 18V | ||
Vos - Input Offset Voltage 2 mV | ||
Minimum Operating Temperature 0°C | ||
Slew Rate 15V/μs | ||
CMRR - Common Mode Rejection Ratio 80dB | ||
Maximum Operating Temperature 70°C | ||
Series PGA202 | ||
Standards/Approvals No | ||
GBP - Gain Bandwidth Product 1MHz | ||
Length 19.3mm | ||
Height 4.57mm | ||
Supply Current 6.5mA | ||
Automotive Standard No | ||
Programmable Gain Amplifiers (PGA), Texas Instruments
Programmable Gain Amplifiers (PGA)
Programmable Gain Amplifiers are Operational, Instrumentation or Differential Amplifiers in which the gain can be programmed or selected, either via hardware (IC pin selection) or software using a serial communications link.