Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SKF
	Product Type	Radial Shaft Seal
	Material	Fluororubber
	Inside Diameter	90mm
	Outside Diameter	115mm
	Minimum Operating Temperature	-25°C
	Thickness	12mm
	Maximum Operating Temperature	200°C
	Standards/Approvals	DIN 3760, ISO 6194

	Select all
	Brand SKF
	Product Type Radial Shaft Seal
	Material Fluororubber
	Inside Diameter 90mm
	Outside Diameter 115mm
	Minimum Operating Temperature -25°C
	Thickness 12mm
	Maximum Operating Temperature 200°C
	Standards/Approvals DIN 3760, ISO 6194

COO (Country of Origin):: CN

SKF Radial Shaft Seal, 90mm Inside Diameter, 115mm Outside Diameter - 90X115X12 HMSA10 V

This radial shaft seal provides a sealing solution for rotating shafts in industrial equipment, designed to retain lubricants and exclude contaminants in demanding environments. It is manufactured by SKF and constructed from fluororubber to withstand elevated temperatures while maintaining flexibility for dynamic rotary applications.

Features and Benefits:

• Withstands continuous temperatures up to 200°C for high-heat applications • Operates down to -25°C to maintain sealing in low-temperature conditions • Conforms to DIN 3760 for standardised radial sealing Interface • Meets ISO 6194 for rotary sealing performance criteria • Thickness of 12mm for robust axial sealing engagement

Applications

• Suitable for automation gearbox shaft sealing under thermal stress • Ideal for electrical motor output shafts exposed to heat • Used for mechanical drive assemblies requiring oil retention • Can be used for rotary components in electronics cooling systems

What elastomer characteristics affect chemical and thermal resistance?

The seal uses fluororubber, which provides enhanced resistance to oils and high temperatures compared with general-purpose elastomers, aiding longevity in oil-laden, hot environments.

How does the seal cope with shaft misalignment or eccentricity?

The material elasticity allows the lip to maintain contact over minor shaft run-out, permitting acceptable sealing where slight eccentricity is present without immediate failure.

What outer housing compatibility should be considered for installation?

The outside diameter is 115mm so housings must provide a matching bore for an interference fit to ensure correct radial location and axial retention.

How does the design influence maintenance intervals in industrial use?

The high-temperature capability and oil compatibility reduce degradation rates, which can extend service intervals compared with Seals MADE from lower-grade elastomers.

SKF Fluororubber Radial Shaft Seal, 90 mm ID, 115 mm OD

FREE delivery for orders over ₱5,000.00