Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SKF
	Product Type	Rotary Shaft Seal
	Material	Fluororubber
	Inside Diameter	17mm
	Outside Diameter	32mm
	Thickness	7mm
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	200°C
	Standards/Approvals	DIN 3760, ISO 6194

	Select all
	Brand SKF
	Product Type Rotary Shaft Seal
	Material Fluororubber
	Inside Diameter 17mm
	Outside Diameter 32mm
	Thickness 7mm
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 200°C
	Standards/Approvals DIN 3760, ISO 6194

COO (Country of Origin):: CN

SKF Rotary Shaft Seal, 17mm Inside Diameter, 32mm Outside Diameter - 17X32X7 HMSA10 V

This rotary shaft seal is designed to retain lubricants and exclude contaminants in rotating assemblies operating across a broad temperature range. It serves as a sealing Interface between shafts and housings in industrial equipment, providing a resilient barrier for dynamic rotary motion in automation, electrical and mechanical systems.

Features and Benefits:

• Fluororubber material for chemical and heat resistance • Rated to 200°C for high-temperature operation • Functional down to -25°C for low-temperature environments • Conforms to DIN 3760 for standardised dimensional fit • Meets ISO 6194 for rotary sealing performance validation • 7mm section thickness offering robust radial sealing

Applications

• Suitable for high-temperature motor shaft sealing in automation systems • Ideal for gearboxes in industrial electronics cooling assemblies • Used with rotating bearings in mechanical drives and actuators • Can be used for oil containment in electrical generator shafts

What shaft size does it accommodate?

It fits shafts with an internal diameter of 17mm, ensuring the correct interference fit where required.

What outer housing dimension should be prepared for installation?

The housing bore should match a 32mm outer diameter to achieve a proper press fit.

How does the material selection affect longevity under heat?

The fluororubber compound retains elastomeric properties at elevated temperatures, maintaining lip contact and sealing efficacy up to 200°C.

Is the seal suitable for environments with frequent temperature cycling?

Yes, its specified minimum of -25°C and high-temperature limit support reliable operation through repeated thermal excursions.

Which standards verify its dimensional and performance characteristics?

Compliance with DIN 3760 and ISO 6194 confirms standardised geometry and recognised rotary sealing requirements.

SKF Fluororubber Rotary Shaft Seal, 17 mm ID, 32 mm OD

FREE delivery for orders over ₱5,000.00