Fluke I1010 Current Clamp, 1000 A DC Max, AC/DC Adapter, 600 A ac AC Max, Voltage Output

RS Stock No.:: 237-4224
Distrelec Article No.:: 176-12-781
Mfr. Part No.:: 1640971
Manufacturer:: Fluke

Fluke I1010 Current Clamp, 1000 A DC Max, AC/DC Adapter, 600 A ac AC Max, Voltage Output

Currently unavailable

Sorry, we don't know when this will be back in stock.

Alternative

This product is not currently available. Here is our alternative recommendation.

RS PRO Clamp Meter, 1000 A 1000 A 1000 V 1000 V ac CAT III Non-Contact Voltage Detector

RS Stock No.: 123-3224

Each

PHP12,851.71

(exc. VAT)

PHP14,393.92

(inc. VAT)

RS Stock No.:: 237-4224
Distrelec Article No.:: 176-12-781
Mfr. Part No.:: 1640971
Manufacturer:: Fluke

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Fluke
	Product Type	Current Clamp
	Adapter Type	AC/DC
	Maximum DC Current	1000A
	Maximum AC Current	600A ac
	Accuracy	±2 % + 0.5 A
	Maximum Conductor Size	30 mm
	Cable Length	1.6m
	Output Type	Voltage
	Connector Type	4 mm Plug
	Battery Life	60h
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	50°C
	Model Number	I1010
	Standards/Approvals	No
	Safety Category Voltage	600V
	Safety Category Level	CAT III

	Select all
	Brand Fluke
	Product Type Current Clamp
	Adapter Type AC/DC
	Maximum DC Current 1000A
	Maximum AC Current 600A ac
	Accuracy ±2 % + 0.5 A
	Maximum Conductor Size 30 mm
	Cable Length 1.6m
	Output Type Voltage
	Connector Type 4 mm Plug
	Battery Life 60h
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 50°C
	Model Number I1010
	Standards/Approvals No
	Safety Category Voltage 600V
	Safety Category Level CAT III

RoHS Status: Exempt

COO (Country of Origin):: TH

FLUKE Current Clamp, 600V Safety Category Voltage, 60h Battery Life - 1640971

Use this current clamp from FLUKE when you need to measure flow without breaking a circuit. Wide jaws allow you to clamp the device over conductor diameters up to 30mm. Marks on each jaw arm help you reliably centre the conductor. A quick press of the lever opens and closes the jaws, so you can use the clamp one-handed for convenience. The 1.6m cable length means you'll have no problem reaching into awkward spaces.

Features & Benefits

• Hall-effect probe provides accurate readings from AC and DC circuits

• CAT III 600V safety category rating means it's safe to use on high-power busbars and distribution circuits

• Shrouded banana plugs protect you from shocks

• 60h battery life for dependability

Applications

• Automotive industry

• Medical equipment

• Telecommunications networks

• Consumer electronics

• Power distribution

What's the measuring range of this current clamp?

This clamp measures DC currents between 1 and 1000A and AC currents between 1 and 600A, making it suitable for domestic and industrial circuits.

What instruments does this current clamp plug into?

The product works with FLUKE multimeters, 120B series oscilloscopes and process meters. This includes the 125B scopemeter (919-5065), 789 series loop calibrator (449-4982) and 175 digital handheld multimeter (394-8826).

Fluke Current Probes

Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.

Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.

d.c. current zero control for nulling out jaw/sensor offset

Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents

Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter

Battery check mode

Compatible with meter input impedance ≥1MΩ

Conforms to IEC 1010-1 Cat III 600V

Supplied With: 9V PP3 alkaline battery and operators manual.