Renesas Electronics, Bus Switch, 5 x 1:1, 24-Pin
- RS Stock No.:
- 263-8032P
- Mfr. Part No.:
- QS3384PAG
- Manufacturer:
- Renesas Electronics
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 263-8032P
- Mfr. Part No.:
- QS3384PAG
- Manufacturer:
- Renesas Electronics
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Renesas Electronics | |
| Product Type | Bus Switch | |
| Logic Family | CMOS/TTL | |
| Configuration | 5 x 1:1 | |
| Number of Elements per Chip | 6 | |
| Maximum Quiescent Current | 1.5mA | |
| Minimum Supply Voltage | -0.5V | |
| Maximum Supply Voltage | 7V | |
| Pin Count | 24 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 0.25ns | |
| Maximum On State Resistance | 7Ω | |
| Maximum Operating Temperature | 85°C | |
| Series | IDTQS3384 | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Bus Width | 10bit | |
| Select all | ||
|---|---|---|
Brand Renesas Electronics | ||
Product Type Bus Switch | ||
Logic Family CMOS/TTL | ||
Configuration 5 x 1:1 | ||
Number of Elements per Chip 6 | ||
Maximum Quiescent Current 1.5mA | ||
Minimum Supply Voltage -0.5V | ||
Maximum Supply Voltage 7V | ||
Pin Count 24 | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 0.25ns | ||
Maximum On State Resistance 7Ω | ||
Maximum Operating Temperature 85°C | ||
Series IDTQS3384 | ||
Standards/Approvals No | ||
Automotive Standard No | ||
Bus Width 10bit | ||
- COO (Country of Origin):
- TW
The Renesas Electronics provides a set of two high-speed low resistance CMOS switches connecting inputs to outputs without propagation delay and without generating additional ground bounce noise. Individual enables are used to turn on the switches. It is Ideal for signal and control switching since the device adds no noise, ground bounce, propagation delay, or significant power consumption to the system. It can also be used for analogue switching applications such as video.
Enhanced N channel FET with no inherent diode to Vcc
Zero propagation delay, zero added ground bounce
Fast turn-on/turn-off time
Undershoot clamp diodes on all switch and control inputs
Related links
- RS PRO 150 mm Stainless Steel Scissors
- Belden Cat6 Ethernet Cable Grey PVC Sheath, 100m
- RS PRO Combination Pliers Straight Tip, 34mm Jaw
- Unistrut 41 x 41mm Slotted Galvanised Steel Strut, 2m Long
- Arduino Uno Rev 3 SMD
- Stanley Tylon 8m Tape Measure, Metric & Imperial
- RS PRO Stainless Steel Perforated Metal Sheet 500mm x 500mm, 0.55mm Thick
- RS PRO Phillips Screwdriver 150 mm Blade, 270 mm Overall
