SKF 6303/C3 1 Row Ball Bearing - 17 mm ID, 47 mm OD

Looking for a ball bearing that runs quiet? Try this single-row deep-groove ball bearing from SKF. It produces minimal vibration so helps to keep machinery noise down. With its robust steel construction, the unit is able to withstand the demands of harsh environments. Steel also resists corrosion, so is safe to use in humid conditions. Low friction means the unit stays cool, helping your equipment run efficiently at lower temperatures. For reliability, this bearing's optimised geometry allows it to reach high rotational speeds in both axial and radial load applications.

• Robust steel cage to keep rolling elements in place for optimal performance when rotating either forwards or backwards

• Food and beverage industry

This bearing is part of SKF's Explorer range with rolling elements and raceways designed to enhance the formation of a hydrodynamic lubricant film. This reduces wear on the bearing, so you can be sure of an extended lifespan.

Deep groove ball bearings are versatile. They are simple in design, non-separable, suitable for high speeds and are robust in operation, requiring little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from SKF in many designs, variants and sizes.

SKF single and double row deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions.;Single row deep groove ball bearings are available open or capped (with seals or shields).;Double row deep groove ball bearings are only available as open bearings (without seals or shields).

2RS1 - Contact seal, NBR, on one or both sides;2Z - Shield on one or both sides;C3 - Radial internal clearance greater than normal;2RZ - Non-contact seal, NBR, on one or both sides