John Drummond, LED Voltage Tester, 500V ac/dc, Mains Powered CAT IV, CAT III, MTL10

RS Stock No.:: 706-8573
Mfr. Part No.:: MTL10
Manufacturer:: John Drummond

John Drummond, LED Voltage Tester, 500V ac/dc, Mains Powered CAT IV, CAT III, MTL10

Subtotal (1 unit)*

PHP8,087.20

(exc. VAT)

PHP9,057.66

(inc. VAT)

FREE delivery for orders over ₱3,000.00

In Stock

2 unit(s) ready to ship from another location
Plus 4 unit(s) shipping from April 03, 2026
Plus 8 unit(s) shipping from May 01, 2026

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per Unit
1 +	PHP8,087.20

*price indicative

RS Stock No.:: 706-8573
Mfr. Part No.:: MTL10
Manufacturer:: John Drummond

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	John Drummond
	Product Type	Voltage Tester
	Display Type	LED
	IP Rating	IP67
	Power Source	Mains
	Weight	320g
	Minimum Operating Temperature	-10°C
	Maximum Voltage	500V ac/dc
	Maximum Operating Temperature	55°C
	Height	72mm
	Hazardous Area Certification	No
	Standards/Approvals	BS EN 61326-1
	Width	112 mm
	Length	213mm
	Safety Category Voltage	1000V
	Safety Category Level	CAT IV, CAT III

	Select all
	Brand John Drummond
	Product Type Voltage Tester
	Display Type LED
	IP Rating IP67
	Power Source Mains
	Weight 320g
	Minimum Operating Temperature -10°C
	Maximum Voltage 500V ac/dc
	Maximum Operating Temperature 55°C
	Height 72mm
	Hazardous Area Certification No
	Standards/Approvals BS EN 61326-1
	Width 112 mm
	Length 213mm
	Safety Category Voltage 1000V
	Safety Category Level CAT IV, CAT III

RoHS Status: Not Applicable

COO (Country of Origin):: PH

Drummond Test Lamps MTL10

Bright LED indication of voltage between 50V and 500V AC/DC

Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight

Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems

Finger shields and insulated probe tips with only 4mm of exposed metal

Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant

Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38)

Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V

No batteries required

Mains Voltage Indicators - Contact

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Supplied with

Carry case, right angled probe tip, two straight tips and instructions