Analog Devices ADP7112ACBZ-5.0-R7, 1 Low Dropout Voltage, Voltage Regulator 200mA, 5 V 2-Pin, WLCSP
- RS Stock No.:
- 153-3198P
- Mfr. Part No.:
- ADP7112ACBZ-5.0-R7
- Manufacturer:
- Analog Devices
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 153-3198P
- Mfr. Part No.:
- ADP7112ACBZ-5.0-R7
- Manufacturer:
- Analog Devices
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Analog Devices | |
| Regulator Type | Low Dropout Voltage | |
| Maximum Output Current | 200mA | |
| Number of Outputs | 1 | |
| Output Voltage | 5 V | |
| Line Regulation | 0.02 %/V | |
| Load Regulation | 0.004 %/mA | |
| Accuracy | ±0.8% | |
| Polarity | Positive | |
| Mounting Type | Surface Mount | |
| Quiescent Current | 320µA | |
| Package Type | WLCSP | |
| Pin Count | 2 | |
| Output Type | Fixed | |
| Dimensions | 0.99 x 1.2 x 0.33mm | |
| Minimum Input Voltage | 2.7 V | |
| Maximum Input Voltage | 20 V | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Temperature | -40 °C | |
| Height | 0.33mm | |
| Length | 0.99mm | |
| Width | 1.2mm | |
| Select all | ||
|---|---|---|
Brand Analog Devices | ||
Regulator Type Low Dropout Voltage | ||
Maximum Output Current 200mA | ||
Number of Outputs 1 | ||
Output Voltage 5 V | ||
Line Regulation 0.02 %/V | ||
Load Regulation 0.004 %/mA | ||
Accuracy ±0.8% | ||
Polarity Positive | ||
Mounting Type Surface Mount | ||
Quiescent Current 320µA | ||
Package Type WLCSP | ||
Pin Count 2 | ||
Output Type Fixed | ||
Dimensions 0.99 x 1.2 x 0.33mm | ||
Minimum Input Voltage 2.7 V | ||
Maximum Input Voltage 20 V | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Temperature -40 °C | ||
Height 0.33mm | ||
Length 0.99mm | ||
Width 1.2mm | ||
The ADP7112 is a CMOS, low dropout (LDO) linear regulator that operates from 2.7 V to 20 V and provides up to 200 mA of output current. This high input voltage LDO is ideal for the regulation of high performance analog and mixed signal circuits operating from 20 V down to 1.2 V rails. Using an advanced proprietary architecture, the device provides high power supply rejection, low noise, and achieves excellent line and load transient response with a small 2.2 μF ceramic output capacitor.
Low noise: 11 μV rms independent of fixed output voltage
PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V
Input voltage range: 2.7 V to 20 V
Maximum output current: 200 mA
Initial accuracy: ±0.8%
User programmable soft start
Low quiescent current, IGND = 50 μA (typical) with no load
PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V
Input voltage range: 2.7 V to 20 V
Maximum output current: 200 mA
Initial accuracy: ±0.8%
User programmable soft start
Low quiescent current, IGND = 50 μA (typical) with no load
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Related links
- Texas Instruments LP2986AIM-5.0/NOPB Voltage Regulator 200mA SOIC
- STMicroelectronics LDK120C32R Voltage Regulator 200mA SOT-323
- STMicroelectronics LDK120C10R Voltage Regulator 200mA SOT-323
- STMicroelectronics LDBL20D-12R Voltage Regulator 200mA 5 V 4-Pin, STSTAMP
- Analog Devices Regulator 5 V, MSOP 8-Pin
- Texas Instruments LM2937ES-5.0/NOPB Voltage Regulator 500mA D2PAK (TO-263)
- Texas Instruments LP2992AIM5-5.0/NOPB Voltage Regulator 250mA SOT-23
- Nisshinbo Micro Devices NJM12856U2-33-TE1 Low Dropout Regulator 3.3 V
