FTDI Chip, USB to Serial UART, 1-Channel 3 Mbps, 5V, USB to UART, 1.8 V, 28-Pin SSOP
- RS Stock No.:
- 275-0036P
- Mfr. Part No.:
- FT232RNL-REEL
- Manufacturer:
- FTDI Chip
This image is representative of the product range
Bulk discount available
View bulk pricing optionsSubtotal 10 units (supplied on a continuous strip)*
PHP2,772.70
(exc. VAT)
PHP3,105.40
(inc. VAT)
FREE delivery for orders over ₱3,000.00
Temporarily out of stock
- 3,224 unit(s) shipping from November 04, 2026
- Plus 7,900 unit(s) shipping from December 02, 2026
- Plus 6,000 unit(s) shipping from December 30, 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 10 - 49 | PHP277.27 |
| 50 - 99 | PHP268.95 |
| 100 - 1999 | PHP260.88 |
| 2000 + | PHP253.05 |
*price indicative
- RS Stock No.:
- 275-0036P
- Mfr. Part No.:
- FT232RNL-REEL
- Manufacturer:
- FTDI Chip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FTDI Chip | |
| Maximum Data Rate | 3Mbps | |
| Number of Transceivers | 1 | |
| Product Type | USB to Serial UART | |
| Sub Type | USB Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| Maximum Supply Voltage | 5V | |
| Minimum Supply Voltage | 1.8V | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB to UART | |
| Maximum Operating Temperature | 85°C | |
| Series | FT232RNL | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Supply Current | 7mA | |
| Select all | ||
|---|---|---|
Brand FTDI Chip | ||
Maximum Data Rate 3Mbps | ||
Number of Transceivers 1 | ||
Product Type USB to Serial UART | ||
Sub Type USB Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
Maximum Supply Voltage 5V | ||
Minimum Supply Voltage 1.8V | ||
Package Type SSOP | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB to UART | ||
Maximum Operating Temperature 85°C | ||
Series FT232RNL | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
Supply Current 7mA | ||
The FTDI Chip USB UART IC is a USB to serial UART interface device which simplifies USB to serial designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operate efficiently with a USB host controller by using as little as possible of the total USB bandwidth available.
AVCC filtering
RoHS compliant
POR and LDO regulator
Supports synchronous bit bang mode
New FTDI Chip ID security dongle feature
Signal inversion and drive strength selection
Related links
- Arduino Uno Rev 3 SMD
- RS PRO Stainless Steel Perforated Metal Sheet 500mm x 500mm, 0.55mm Thick
- RS PRO Combination Pliers Straight Tip, 34mm Jaw
- Belden Cat6 Ethernet Cable Grey PVC Sheath, 100m
- RS PRO Phillips Screwdriver 150 mm Blade, 270 mm Overall
- RS PRO 150 mm Stainless Steel Scissors
- Stanley Tylon 8m Tape Measure, Metric & Imperial
- Unistrut 41 x 41mm Slotted Galvanised Steel Strut, 2m Long