FTDI Chip FT232BL-TRAY, USB Controller 1.05 Mbps, 5.25V, USB 2.0, 6 V, 32-Pin LQFP
- RS Stock No.:
- 216-2596P
- Mfr. Part No.:
- FT232BL-TRAY
- Manufacturer:
- FTDI Chip
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 216-2596P
- Mfr. Part No.:
- FT232BL-TRAY
- Manufacturer:
- FTDI Chip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FTDI Chip | |
| Product Type | USB Controller | |
| Maximum Data Rate | 1.05Mbps | |
| USB Specification | USB 1.1, USB 2.0 | |
| Sub Type | Controller | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 6V | |
| Maximum Supply Voltage | 5.25V | |
| Mount Type | Surface | |
| Package Type | LQFP | |
| Pin Count | 32 | |
| Supported Protocols | USB 2.0 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Series | FT232BL | |
| Width | 7mm | |
| Standards/Approvals | No | |
| Length | 7mm | |
| Height | 1.6mm | |
| Supply Current | 25mA | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand FTDI Chip | ||
Product Type USB Controller | ||
Maximum Data Rate 1.05Mbps | ||
USB Specification USB 1.1, USB 2.0 | ||
Sub Type Controller | ||
ESD Protection Yes | ||
Minimum Supply Voltage 6V | ||
Maximum Supply Voltage 5.25V | ||
Mount Type Surface | ||
Package Type LQFP | ||
Pin Count 32 | ||
Supported Protocols USB 2.0 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Series FT232BL | ||
Width 7mm | ||
Standards/Approvals No | ||
Length 7mm | ||
Height 1.6mm | ||
Supply Current 25mA | ||
Automotive Standard No | ||
The FTDI Chip USB to serial UART interface IC with Single Chip USB to Asynchronous Serial Data Transfer has Full Handshaking & Modem Interface Signals.
Integrated power on reset circuit
Integrated 6MHz to 48Mhz clock multiplier PLL
USB 1.1 and USB 2.0 compatible
EEPROM programmable on board via USB
Related links
- Arduino Uno Rev 3 SMD
- RS PRO Stainless Steel Perforated Metal Sheet 500mm x 500mm, 0.55mm Thick
- RS PRO Combination Pliers Straight Tip, 34mm Jaw
- Belden Cat6 Ethernet Cable Grey PVC Sheath, 100m
- RS PRO Phillips Screwdriver 150 mm Blade, 270 mm Overall
- RS PRO 150 mm Stainless Steel Scissors
- Stanley Tylon 8m Tape Measure, Metric & Imperial
- Unistrut 41 x 41mm Slotted Galvanised Steel Strut, 2m Long