onsemi, USB Controller, 2-Channel 10 Gbps, 3.6 V, USB 3.1, 3.3 V, 30-Pin WQFN
- RS Stock No.:
- 195-2479P
- Mfr. Part No.:
- NB7NPQ1002MMTTWG
- Manufacturer:
- onsemi
This image is representative of the product range
Bulk discount available
Subtotal 100 units (supplied on a continuous strip)*
PHP9,484.40
(exc. VAT)
PHP10,622.50
(inc. VAT)
FREE delivery for orders over ₱3,000.00
Last RS stock
- Final 2,990 unit(s), ready to ship from another location
Units | Per Unit |
|---|---|
| 100 - 490 | PHP94.844 |
| 500 - 990 | PHP86.912 |
| 1000 - 1490 | PHP80.268 |
| 1500 + | PHP74.506 |
*price indicative
- RS Stock No.:
- 195-2479P
- Mfr. Part No.:
- NB7NPQ1002MMTTWG
- Manufacturer:
- onsemi
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Number of Transceivers | 2 | |
| Maximum Data Rate | 10Gbps | |
| Product Type | USB Controller | |
| Sub Type | Controller | |
| USB Specification | USB 3.1 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | WQFN | |
| Pin Count | 30 | |
| Supported Protocols | USB 3.1 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 2.6 mm | |
| Standards/Approvals | No | |
| Height | 0.75mm | |
| Length | 4.6mm | |
| Series | NB7NPQ1002M | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Number of Transceivers 2 | ||
Maximum Data Rate 10Gbps | ||
Product Type USB Controller | ||
Sub Type Controller | ||
USB Specification USB 3.1 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type WQFN | ||
Pin Count 30 | ||
Supported Protocols USB 3.1 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 2.6 mm | ||
Standards/Approvals No | ||
Height 0.75mm | ||
Length 4.6mm | ||
Series NB7NPQ1002M | ||
Automotive Standard No | ||
The NB7NPQ1002M is a high performance single−Port linear redriver designed for USB 3.1 Gen 1 and USB 3.1 Gen 2 applications that supports both 5 Gbps and 10 Gbps data rates. Signal integrity degrades from PCB traces, transmission cables, and inter−symbol interference (ISI). The NB7NPQ1002M compensates for these losses by engaging varying levels of equalization at the input receiver, and flat gain amplification on the output transmitter. The NB7NPQ1002M offers programmable equalization and flat gain to optimize performance over various physical mediums. The NB7NPQ1002M contains an automatic receiver detect function which will determine whether the output is active. The receiver detection loop will be active if the corresponding channel’s signal detector is idle for a period of time. The channel will then move to Unplug Mode if a load is not detected, or it will return to Low Power Mode (Slumber mode) due to inactivity. Both the channels are independent with individual controls.