onsemi, USB Controller, 2-Channel 10 Gbps, 3.6 V, USB 3.1, 3.3 V, 30-Pin WQFN

This image is representative of the product range

View all USB Interface ICs
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
RS Stock No.:
195-2478
Mfr. Part No.:
NB7NPQ1002MMTTWG
Manufacturer:
onsemi
Find similar products by selecting one or more attributes.
Select all

Brand

onsemi

Maximum Data Rate

10Gbps

Product Type

USB Controller

Number of Transceivers

2

USB Specification

USB 3.1

Sub Type

Controller

Power Supply Type

Single

ESD Protection

Yes

Maximum Supply Voltage

3.6V

Minimum Supply Voltage

3.3V

Mount Type

Surface

Package Type

WQFN

Pin Count

30

Supported Protocols

USB 3.1

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Width

2.6 mm

Series

NB7NPQ1002M

Height

0.75mm

Length

4.6mm

Standards/Approvals

No

Automotive Standard

No

The NB7NPQ1002M is a high performance single−Port linear redriver designed for USB 3.1 Gen 1 and USB 3.1 Gen 2 applications that supports both 5 Gbps and 10 Gbps data rates. Signal integrity degrades from PCB traces, transmission cables, and inter−symbol interference (ISI). The NB7NPQ1002M compensates for these losses by engaging varying levels of equalization at the input receiver, and flat gain amplification on the output transmitter. The NB7NPQ1002M offers programmable equalization and flat gain to optimize performance over various physical mediums. The NB7NPQ1002M contains an automatic receiver detect function which will determine whether the output is active. The receiver detection loop will be active if the corresponding channel’s signal detector is idle for a period of time. The channel will then move to Unplug Mode if a load is not detected, or it will return to Low Power Mode (Slumber mode) due to inactivity. Both the channels are independent with individual controls.

Related links