Eaton 4A British Standard Fuse, A1, 550V, 44.5mm

Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.

• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

This British standard fuse is a low voltage fuse-link designed for effective circuit protection. With compact dimensions of 14x55mm, it offers a current rating of 4A and a voltage rating of 550V. Complying with BS 88 standards, it is suitable for general industrial applications. Its high rupture capacity ensures safety and performance in various environments.

• Complies with BS88 and IEC 60269 standards
• High rupture capacity enhances system safety
• gG application category is ideal for cable protection
• Rated for 80 kA breaking capacity for efficient fault handling
• Compact design facilitates easy installation
• Versatile usage across different low voltage applications

• Circuit protection in industrial equipment
• Protection for electrical installations and devices
• Suitable for low voltage environments requiring dependable fusing
• Utilised in automation and process control systems

Yes, it is designed for high rupture capacity.

Yes, it is compatible with standard RS20 CM32FC fuse holders.

Yes, it is intended for a wide range of industrial uses.

Yes, it is specifically designed for low voltage environments.

Eaton formerly known as Bussmann