STMicroelectronics Buck Converter, Surface, 38V Output Voltage, 2 A Output Current
- RS Stock No.:
- 225-0009P
- Mfr. Part No.:
- A6986ITR
- Manufacturer:
- STMicroelectronics
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 225-0009P
- Mfr. Part No.:
- A6986ITR
- Manufacturer:
- STMicroelectronics
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | STMicroelectronics | |
| Output Voltage 1 | 38V | |
| Product Type | Buck Converter | |
| Output Current | 2A | |
| Mount Type | Surface | |
| Number of Outputs | 1 | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -40°C | |
| Number of Pins | 16 | |
| Series | A6986 | |
| Package Type | HTSSOP-16 | |
| Depth | 1.2mm | |
| Length | 5.1mm | |
| Width | 6.6mm | |
| Standards/Approvals | RoHS, AEC-Q100 | |
| Maximum Input Voltage | 40V | |
| Minimum Input Voltage | 4V | |
| Select all | ||
|---|---|---|
Brand STMicroelectronics | ||
Output Voltage 1 38V | ||
Product Type Buck Converter | ||
Output Current 2A | ||
Mount Type Surface | ||
Number of Outputs 1 | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -40°C | ||
Number of Pins 16 | ||
Series A6986 | ||
Package Type HTSSOP-16 | ||
Depth 1.2mm | ||
Length 5.1mm | ||
Width 6.6mm | ||
Standards/Approvals RoHS, AEC-Q100 | ||
Maximum Input Voltage 40V | ||
Minimum Input Voltage 4V | ||
The STMicroelectronics 5 W synchronous iso-buck converter is an automotive grade device specifically designed for the isolated buck topology. The 100% duty cycle capability and the wide input voltage range meet the cold crank and load dump specifications for automotive systems. The primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. No optocoupler is required. The primary sink capability typically up to 1.9 A (even during soft-start) allows a proper energy transfer to the secondary side as well as enabling a tracked soft-start of the secondary output.
AEC-Q100 Grade 1 qualified
Designed for iso-buck topology
4 V to 38 V operating input voltage
Primary output voltage regulation / no optocoupler required
1.9 A typical sink Peak primary current capability
Peak current mode architecture in forced PWM operation
300 ns blanking time
Related links
- Unistrut 41 x 41mm Slotted Galvanised Steel Strut, 2m Long
- RS PRO Stainless Steel Perforated Metal Sheet 500mm x 500mm, 0.55mm Thick
- Belden Cat6 Ethernet Cable Grey PVC Sheath, 100m
- Stanley Tylon 8m Tape Measure, Metric & Imperial
- Arduino Uno Rev 3 SMD
- RS PRO Combination Pliers Straight Tip, 34mm Jaw
- RS PRO 150 mm Stainless Steel Scissors
- RS PRO Phillips Screwdriver 150 mm Blade, 270 mm Overall