Burkert Solenoid Valve 221608, 2 Port, NC, 110V ac

Note:

Due to their internal complexity, these valves can only be used with clean neutral media Electrical connector can be ordered separately

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Compact size to aid installation when space is limited

Coupled spring diaphragm system opened without differential pressure

Flow factor(Kv) is 1.9m³/h

Flow-optimized housing and diaphragm geometry for high flow

Operating temperature is between -10°C and 80°C

Power consumption is 8W

Sealed coil and high flow rate

Heating and refrigeration

Water treatment and swimming pool technology