Burkert Solenoid Valve 140894, 2 Port, NC G 3/4, 230V ac, G 3/4

This image is representative of the product range

Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.

Alternative

This product is not currently available. Here is our alternative recommendation.

Each

PHP6,742.31

(exc. VAT)

PHP7,551.39

(inc. VAT)

RS Stock No.:
370-0141
Mfr. Part No.:
140894
Manufacturer:
Burkert
Find similar products by selecting one or more attributes.
Select all

Brand

Burkert

Supply Voltage

230V ac

Product Type

Solenoid Valve

Number of Ports

2

Inlet Port Size

G 3/4

Outlet Port Size

G 3/4

Default Valve Position

NC

Outlet Connection Type

Threaded

Inlet Connection Type

Threaded

Orifice Diameter

20mm

Body Material

Brass

Application

Liquid, Neutral Gas

Series

6211

Maximum Operating Pressure

10 bar

Minimum Operating Temperature

0°C

Maximum Operating Temperature

55°C

Standards/Approvals

UR/CSA

Servo Assist

Yes

Hazardous Area Certification

No

Flow Factor Kv

8.3m³/h

Maximum Closing Time

600ms

Maximum Opening Time

350ms

COO (Country of Origin):
DE

6211 Series 2//2 way Servo-Assisted, Normally Closed Solenoid Valves


Brass body with separating servo membrane and polyamide coil

Total or no control

For use with gas, air, water and oils, other liquids that do not contain oils or greases, hot water up to 70°C, alkaline and bleaching detergents

NBR seal material

Maximum viscosity 22 mm2/s

0.5 to 10 bar pressure range

Ambient temperature range 0 to +70°C

Power consumption 4W (DC Inrush); 9VA (AC Inrush); 4W (DC Hold); 6VA (AC Hold)

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Note

Only use on mediums suitable for NBR seal material and brass.

Related links

Be the first to know about our latest products and offers

Email address

The personal information you provide to us when signing up to this mailing list will be processed in line with the Privacy Policy