Burkert Solenoid Valve 125304, 2 Port, NC, 230V ac 6.35 mm, 6.35 mm

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Brass body with a polyamide coil

Coil can be changed easily with valve in place

Coil can be locked in four by 90° positions or move free in between, as required

Direct-acting and compact valve up to diameter of DN 6.0

Flow factor (Kv) is 0.23m³/h

Medium is only in contact with the valve internals and the body

Operating temperature ranges between -10°C and 55°C

Power consumption is 8W

Shut-off, dosing, filling and venting

Small-scale instruments, laboratory and measuring technology

Welding technology