Werma 644 Series Green Steady Effect Beacon Unit for Use with KombiSIGN 70 Stacking Tower System, 230 V ac, LED Bulb,

The WERMA KombiSIGN 71 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place.

• Suitable for machine and manual Andon indication
• Modular system allows a completely free combination of optical and audible signal elements
• Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system
• Completely safe element changes (contact-voltage proof) without the need for tools
• Protection rating IP65 for use in extreme conditions
• Up to 5 elements can be mounted on a terminal base
• Flexible combination of optical and audible elements
• Optical isolation due to O-ring seal stopping illumination of adjacent element
• Operating voltage for the continuous incandescent element is dependant on bulb fitted
• LED EVS elements have an extremely bright, random sequence of light to immediately grab attention
• Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness
• Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word)
• Optional self adjusting siren automatically adjusts output between 80 & 100 dB depending on ambient sound levels
• AS-Interface element can be easily connected to the networking system which considerably reduces complex wiring
• Improved connection with cage clamp technology
• Operating temperature range is -20 to +50 °C
• Polyamide body with polycarbonate lenses, 70 mm diameter

• Seven colours in one beacon
• Different colours can be triggered via the pins in the terminal element
• Positive and negative control logic
• The three basic colours (red/yellow/green) can be triggered using only two PLC outputs
• High light intensity

Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 70.

UL listed, CSA, VDE

This green LED (light-emitting diode) beacon from WERMA is designed for use in a signal tower. It stacks easily onto other beacons in the KombiSIGN 71 range thanks to the bayonet fixings. You can stack up to five elements onto a terminal base to create a complete signalling system. The LED light is highly energy-efficient as it consumes less than 40mA of current. This makes it a cost-effective option for your industrial workplace.

• IP65 (ingress protection) rating certifies the unit is dust-tight and protected from low-pressure water jets
• Wide operating temperature range of -20°C to +60°C for use in demanding environments
• Steady light effect for clearly signalling ongoing processes

• Industrial automation
• Factory control units
• Machine conveyors
• Pharmaceutical testing facilities

This LED beacon has a long lifespan of approximately 50,000 hours for long-lasting use.

This beacon has a height of 65mm and a base diameter of 70mm, so it's compact and won't take up a lot of space.