3M 471 White Vinyl 1296 in Industrial Tape 0.14 mm Thickness

This industrial tape is designed for Visual marking and hazard delineation across industrial settings. It provides a durable, vinyl-backed solution for marking zones and guiding personnel in automation, electronics, electrical and mechanical environments while maintaining functionality across typical workshop temperature ranges.

• High adhesion rubber adhesive delivers 28N/100mm for secure bonds
• Vinyl backing resists tearing with 24.5N/100mm tensile strength
• Thin profile at 0.14mm minimises bulk while maintaining visibility
• Operates up to 77°C for applications near heated components
• Withstands down to 4°C for cold-area marking stability
• Low stretch with 1.3% elongation preserves alignment under tension

• Suitable for floor and equipment hazard marking in factories
• Ideal for taped-off zones around robotic cells and conveyors
• Used for insulating or marking cable runs in electrical panels
• Can be used for temporary component isolation during assembly
• Used with test benches in electronics production for Visual barriers

The roll length is 1296 in, enabling extended continuous runs without frequent joins for large-area demarcation.

The tape supplied is white and comes in a 2 in width suitable for clear contrast and standard marker lanes.

The rubber-based adhesive offers strong initial grab on common surfaces such as painted steel and plastic, reducing lift in high-traffic areas.

With 1.3% elongation and a tensile capacity of 24.5N/100mm the tape resists stretch and maintains positional integrity under modest strain.